Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The West Palm Beach Owner’s Guide
If your Tremron kitchen installation has a failed component, here’s the straight answer: a full Tremron-spec kitchen remodel in West Palm Beach runs $14,000 – $45,000 installed, and the part-level repair that saves you from a full tear-out usually falls between $800 and $6,500 depending on what failed. We stock common Tremron-compatible replacement parts on our trucks, and we install them under the same written price and 365-Day Done Right Promise as every other Bradford job. Most West Palm Beach homeowners discover the problem the same way: a drawer that won’t close, a counter seam that’s opened up, or a cabinet face that’s delaminating from the humidity that rolls through every summer.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with Tremron, and we don’t pretend to be. What we do is match the right part to the right model, price it in writing before the first tool comes out, and stand behind the install for a full year.
Which Tremron Models This Applies To
Tremron’s kitchen line runs across several cabinet and counter configurations, and the part you need depends on the series and the original install date. The compatibility gotcha that trips up most West Palm Beach owners is this: Tremron cabinet boxes changed hinge boring patterns between their classic frameless line and the newer full-overlay series, so a replacement door from one series won’t seat correctly on the other without a hinge swap or redrilling. If you pull a drawer and check the inside wall, you’ll find a stamped series code, usually two letters followed by four digits. That code is the fastest way to confirm what we’re matching.
For the countertops and backsplash, Tremron’s original installs used both 2cm and 3cm stone depending on the year. A 3cm slab can span unsupported sections a 2cm can’t, and if we’re replacing a cracked section, we need to know which you have before we quote. On OEM versus aftermarket: for hardware, we’ll recommend OEM Tremron hinges and slides because the mounting geometry is exact. For cabinet doors and drawer fronts, a quality aftermarket match from a local millwork shop often gets you the same look at 20 – 30% below OEM list, and we’ll tell you when that’s the better call.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Drawer fronts sitting crooked or dragging. The undermount slides have worn past adjustment, or the drawer box itself has loosened at the joinery. You’ll hear a scrape before you see the sag. The fix is slide replacement or drawer box rebuild, not just tightening screws.
- Soft-close doors slamming or bouncing. The damper in the hinge cup has failed. On Tremron frameless cabinets this is a per-door hinge replacement, usually done in one visit. Ignoring it leads to a cracked door edge at the slam point.
- Counter seam separating or lippage between slabs. South Florida’s humidity cycle expands and contracts the substrate under the stone. A seam that opens more than 1/16 inch means the substrate has moved and the seam needs to be cut, cleaned, and re-epoxied, not just caulked over.
- Cabinet face delaminating or finish blistering. This is nearly always moisture intrusion, typically from a sink splash zone or a dishwasher vent path. The veneer or thermofoil has lost adhesion. You’ll see bubbles first, then peeling. Replacing the affected faces is cheaper than replacing the boxes, but only if we catch it before the substrate swells.
- Pulls or knobs loosening repeatedly. The backing has stripped inside the door or drawer front. Re-tightening just widens the hole. The right repair is a threaded insert or a replacement front, not a bigger screw.
Replacement Cost & What’s Included
For a Tremron kitchen remodel in West Palm Beach, the full installed range is $14,000 – $45,000. A smaller partial refresh lands between $9,000 and $20,000. If you’re looking at a single failed component instead of a whole room, here’s how it breaks down:
- Cabinet door or drawer front replacement: $150 – $600 per door depending on size, finish, and whether we’re matching OEM or aftermarket millwork.
- Cabinet installation (new boxes): $4,000 – $13,000 for a full run.
- Countertop replacement (Tremron-compatible stone): $2,000 – $6,500 including fabrication, templating, and install.
- Backsplash replacement: $800 – $2,500 including tear-out of the old tile and new substrate prep.
- Kitchen island rebuild or install: $3,000 – $10,000 depending on size and whether we’re reusing any structure.
Every quote includes parts, labor, tear-out, haul-off, and a written scope. The price we hand you before we start is the price on the final invoice. If something changes in the field, Curtis Lane or his lead calls you before a single cut is made. There are no change orders that show up unannounced. And the whole job carries the 365-Day Done Right Promise: if any part of our work fails within one year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself: pull the drawer out and read the series code, measure the door face with a tape, and take photos of the failed part from two angles. That speeds up the quote and usually lets us walk the job over the phone before we even schedule the truck. What you shouldn’t do is attempt to re-drill hinge cups on a finished door, re-set a stone countertop section, or re-glue delaminating veneer with construction adhesive. All three go wrong in ways that turn a $300 fix into a $3,000 replacement. Stone counter work in particular is heavy, brittle, and unforgiving in tight kitchen corners. If the part is cosmetic hardware, a careful homeowner can swap it. If it involves the boxes, the substrate, or the stone, call (728) 203-9809 and let us put eyes on it.
FAQs
Tremron cabinets and countertops installed in our climate typically last 15 – 25 years, but hinges and slides wear out at 8 – 12 years, and thermofoil or veneer faces in high-humidity kitchens can fail at 10 – 14 years. The salt air near the Intracoastal accelerates hardware corrosion, which is why we recommend a light silicone spray on slides every six months in coastal West Palm Beach homes. Call (728) 203-9809 if your run is showing its age and you want a specific longevity answer for your model.
Yes, in about half the cases we see. Slides, hinges, and dampers are always replaceable. Counter seams can be re-epoxied. A cracked door frame can sometimes be glued and clamped if the break is clean. Delaminated veneer typically can’t be saved because the adhesive layer is shot and the substrate is often compromised by the time you see bubbles. We’ll tell you which side of that line your part falls on before we quote anything, and the estimate is free either way.
A single-part repair like a hinge set or drawer slide swap is done in one visit, usually under two hours. A countertop replacement runs 2 – 3 weeks because of templating and fabrication lead time. A full Tremron kitchen remodel in West Palm Beach runs 6 – 10 weeks from tear-out to final walkthrough, and your written quote includes the schedule, not just the number. Call (728) 203-9809 for a timeline specific to your scope.
We stock common Tremron hinge sets, slides, and cabinet hardware on our service trucks year-round. For doors, drawer fronts, and stone, we order to spec from local fab shops and millworks, which keeps lead times short and gives you traceable materials. If you call before noon on a stock-hardware issue, we can usually get a tech to your West Palm Beach home the same day.
Get a Written Price Before You Commit to Anything
If you’ve got a Tremron kitchen part that’s failing, don’t guess at the fix and don’t pay a contractor to guess for you. Call Bradford Remodeling Co West Palm Beach at (728) 203-9809. We’ll identify the part, give you a straight number, and put the scope in writing before any work starts. Straight number, full scope, no surprises after the invoice. That’s how we’ve done it since 2004, and that’s exactly how the next job goes too.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
