Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The West Palm Beach Owner’s Guide
Most Tamko window and door parts we handle in West Palm Beach fall into the $150 – $850 installed range for hardware, weatherstripping, rollers, locksets, and glass-unit replacements. We stock common Tamko-compatible components on our trucks, and for parts we don’t carry, we can typically have them in hand within 3 to 5 business days. You usually discover the failure the same way every time: a window that refuses to lock, a slider that grinds across the track, or a door that lets daylight through the weatherstripping. In Palm Beach County’s salt air and humidity, the hardware fails long before the frame does. We know because Curtis Lane and our crew have opened up enough of these units across West Palm Beach to see exactly where they give out.
Bradford Remodeling Co West Palm Beach is an independent service provider. We’re not affiliated with Tamko, but we work on their products regularly and know the line’s quirks.
Which Tamko Models This Applies To
Tamko’s window and door line spans single-hung, double-hung, horizontal sliders, casement windows, and hinged patio doors. In Florida, most of what we see are their impact-rated and high-Velocity Hurricane Zone (HVZ) configurations, which carry reinforced frames and laminated glass. That matters when you’re hunting for a replacement part: the HVZ-rated units use thicker sash profiles, which means the balancers, pivot bars, and locking hardware are not interchangeable with Tamko’s standard non-impact line. If you buy a generic balance for a standard double-hung and drop it into an HVZ sash, the tension is wrong and the sash will creep or slam. We’ve corrected that mistake for homeowners more than once.
To identify your unit, look for the Tamko AAMA label, usually on the head jamb or the edge of the sash. It lists the series code, glass type, and impact rating. That label is the fastest way to confirm which hardware set your window uses. When the label’s faded or painted over, our techs measure the sash thickness and the balance shoe, then match against the original Tamko specs. For older units no longer in production, we’ll often spec a quality aftermarket equivalent from a manufacturer that builds to the same dimensional standards. On locksets and rollers, aftermarket parts from established hardware makers typically outlast the original equipment. On balances and weatherstripping, OEM is usually the safer call because the geometry is exact.
Styles & brands we work with
Signs Your Tamko Windows & Doors Is Failing
- Sash won’t stay up or closes on its own. The spiral balance or block-and-tackle assembly has lost tension. In coastal air, the spring inside the balance corrodes and snaps, usually within 8 to 12 years of installation.
- Slider grinds or jumps the track. The nylon rollers have flattened or the bearings have seized. West Palm Beach’s fine sandy soil works its way into the track, chews up the roller wheels, and then the metal frame rides directly on the rail.
- Lock won’t engage or takes force to throw. The keepers and latch have shifted with building settlement, or the die-cast lock internals have corroded. Forcing it is how handles snap off.
- Drafts, visible daylight, or water staining at the sill. The weatherstripping has compressed or the corner seals have failed. On West Palm Beach homes, failed sill seals during rainy season show up as watermarking on interior drywall within weeks.
- Condensation between the glass panes. The insulated glass unit’s seal has failed. Once the desiccant inside the spacer bar is saturated, the fog never clears, and the only correct fix is a new IGU.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Tamko-compatible window and door part replacements run installed in West Palm Beach:
- Weatherstripping replacement (per window or door): $150 – $400
- Slider roller replacement (per panel): $180 – $450
- Window balance or pivot bar replacement (per sash): $200 – $500
- Lockset and keeper replacement (per unit): $150 – $350
- Insulated glass unit replacement (per sash): $400 – $850
- Full window replacement (installed, per opening): $4,500 – $15,000
What drives the spread is access, unit size, and whether we’re matching an impact-rated sash or a standard one. A second-story casement with a custon IGU costs more than a ground-floor slider roller swap. Every quote from Bradford Remodeling Co West Palm Beach includes the part cost, the labor, and the full scope in a written price before we start. There are no numbers that move at the door. That’s The Garrison Standard, and it’s how we’ve operated since 2004. All completed work carries the 365-Day Done Right Promise: if the part or the installation fails within a year, we come back and make it right at no charge.
DIY or Call Us?
Some checks you can do safely. You can clean the tracks, confirm whether a screw has backed out of a keeper, and check for obvious damage around the weatherstripping. What you should not try yourself is anything involving the spring-loaded balance system inside a double-hung sash. Those balances are under tension, and releasing them incorrectly can send a metal component across the room with real force. The same goes for removing an impact-rated sash, which can weigh 60 to 90 pounds and needs two people and the right lifting technique.
If the failure is a roller that’s visibly flattened or a lock that’s corroded, give us a call at (728) 203-9809. Curtis Lane’s rule on this is simple: a homeowner saves nothing if the fix goes wrong and costs twice as much to correct. We’ll come out, identify the exact part, and hand you a written number.
FAQs
The frames and glass can last 25 to 30 years, but the hardware, weatherstripping, and seals typically need attention every 8 to 12 years in our climate. Salt air, humidity, and UV exposure age the mechanical parts far faster than the frames. Call (728) 203-9809 if you need an honest assessment of what’s worth fixing versus replacing.
Rollers, weatherstripping, and locksets are almost always replaced rather than repaired, because the individual components are not made to be rebuilt. Balances can sometimes be re-tensioned if the spring is intact. If the spring inside has snapped, a new balance is required. Call (728) 203-9809 and we’ll tell you which path applies to your unit.
Most roller, lockset, and weatherstripping replacements are done in 45 to 90 minutes per unit. An insulated glass unit replacement typically takes one visit to measure and a second visit to install once the glass arrives from the fabricator, usually within 7 to 10 business days. For a time estimate on your specific window or door, call (728) 203-9809.
We keep common Tamko-compatible rollers, balances, locksets, and weatherstripping profiles on our trucks for the series most common in West Palm Beach homes. Specialized impact-rated hardware and custom-sized insulated glass units are ordered per job. If we don’t have it in the truck, we’ll give you the lead time in writing before you commit to anything. Call (728) 203-9809 to check your model.
- Tamko HVZ impact-rated hardware is not interchangeable with standard Tamko lines, check the AAMA label before buying any part.
- Hardware fails every 8 to 12 years in West Palm Beach’s salt air; frames and glass last decades longer.
- Installed part replacements run $150 – $850 depending on the component and access.
- Spring-loaded balances are under tension; leave those to someone who does it every week.
- Every Bradford Remodeling Co West Palm Beach job gets a written price up front and the 365-Day Done Right Promise in writing.
Written by Curtis Lane, Owner, Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
