Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The West Palm Beach Owner’s Guide
Tamko kitchen remodeling in West Palm Beach typically runs $14,000 to $45,000 for a full-gut renovation, with smaller scoped projects like cabinet replacement or countertop work landing between $4,000 and $13,000. We stock and install Tamko-compatible cabinetry, trim, and associated hardware, and we can usually have a crew on-site within a week of your written estimate. Most homeowners don’t discover a failing Tamko part until the damage has spread: a swollen cabinet base from a slow sink leak, a delaminating countertop seam, or door hinges that have pulled free from the frame. By the time you’re searching for a fix, the real question isn’t just the part. It’s whether the substrate behind it is still sound.
We’re an independent West Palm Beach remodeling contractor, not a Tamko dealer or affiliate. That matters because it means we match the part to the job, not to a brand loyalty card. We install Tamko-compatible materials where they serve the project, and we say so plainly where another documented brand does the job better.
Which Tamko Models This Applies To
Tamko’s kitchen line runs through several series configurations, and the compatibility gotchas live in the hardware and trim profiles, not the brand name stamped on the box. The most common Tamko kitchen components we see in West Palm Beach homes are their laminate and thermofoil cabinet lines, their pre-finished trim systems, and their countertop edging profiles. If you have a paper label still attached inside a drawer or on the back of a cabinet rail, look for the series code. That code tells us the door profile, the hinge bore pattern, and whether the box is framed or frameless. If the label is gone, we measure. A 35mm hinge bore is standard on most Tamko frameless lines; a 1/2-inch overlay hinge is classic on their framed series. Mixing those up is how you end up with doors that don’t close square.
The OEM versus aftermarket decision depends on what failed. For hinges, drawer glides, and soft-close mechanisms, quality aftermarket equivalents from Blum or Salice often outlast the original hardware, and we stock those on our trucks. For cabinet doors, drawer fronts, and trim profiles, you want the actual Tamko spec or a custom match made by a local shop. A door that’s 1/16-inch off on the reveal looks wrong from across the kitchen. We’ve matched enough of them to know.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Hinges pulling loose or sagging doors. The screw holes in the cabinet frame have wallowed out, usually from years of weight and humidity cycling. Tightening the screw works for about a week. The real fix is a repair plate, a new bore, or door replacement if the stile is split.
- Delaminating or peeling laminate. This means moisture got under the wear layer, and in West Palm Beach’s humidity, that happens faster than most owners expect. Once the edge lifts, water keeps working its way in. You can glue the edge back, but that’s a band-aid on a cabinet that’s already compromised.
- Soft-close drawers that slam or won’t stay closed. The damper mechanism inside the glide has failed. On most Tamko lines, that’s a replaceable component, not a full drawer box replacement. If the drawer bottom is sagging, though, that’s a separate problem: the dado slot has widened and the panel is riding loose.
- Swollen or stained cabinet bases under the sink. That’s the classic slow leak that went unnoticed. The part that failed wasn’t made by Tamko. It’s the plumbing connection above it, and the cabinet absorbed the hit. If the base is soft to the touch, it needs replacement before mold gets a foothold in the Florida climate.
- Cracking at the countertop seam or edge profile. Seam failure on laminate tops usually means the substrate underneath shifted or got wet. Re-gluing a seam is a temporary measure. We tell owners straight: if the substrate is swollen, the countertop has to come off and be re-laid.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest breakdown for West Palm Beach. A full Tamko-compatible kitchen remodel runs $14,000 to $45,000, depending on cabinet count, countertop material, and whether we’re moving plumbing or electrical. A cabinet-only scope typically lands between $4,000 and $13,000. Countertop installation runs $2,000 to $6,500. Backsplash work is $800 to $2,500. Those are installed prices, including labor, materials, and disposal. We don’t quote a number for parts and then discover labor later.
What drives the range: linear feet of cabinetry, whether the existing boxes can be saved, the countertop material you choose, and any electrical or plumbing rough-in changes. Every job gets a written, line-item price before we start. That’s The Garrison Standard, and it’s not a request. It’s how we’ve operated since 2004. If something in the field changes, Curtis Lane calls you before a tool comes out. No exceptions.
DIY or Call Us?
Some things are worth checking yourself. Loose hinge screws, drawer glides that need re-clipping, a cabinet door that’s off its track: those are fair game. You can tighten hardware and re-seat a drawer without hurting anything. Where DIY goes wrong is when the part failed because of what’s behind it. A swollen cabinet base means water damage is already in the substrate. A cracked countertop seam means the deck underneath has moved. Replacing a part on a failed substrate is like putting a new door on a frame that’s rotting out of the wall. It looks fine for a season, then it fails again worse.
If you’re not sure which situation you have, call (728) 203-9809 and describe what you’re seeing. We’ll tell you over the phone whether it’s a Saturday-morning fix or a real repair. That call costs you nothing.
FAQs
Expect 15 to 25 years from Tamko laminate or thermofoil cabinets in our humidity, with hinges and glides typically needing replacement around year 10. Coastal air and kitchen moisture shorten that lifespan compared to drier climates, and cabinets under sinks almost always fail first. Call (728) 203-9809 if your cabinets are showing age and you want an honest assessment of what’s worth saving.
Yes, if the damage is limited to the hinge bore, edge banding, or a minor surface scratch, we can usually repair it on-site for less than replacement cost. If the door core is swollen or the stile is split, repair won’t hold, and replacement is the honest call. We’ll show you the damaged part before we recommend spending money.
A scoped part replacement like new drawer glides or a few cabinet doors typically takes one day on-site. A full kitchen remodel runs 4 to 8 weeks depending on scope, permit timing in West Palm Beach, and material lead times. We give you a written schedule with the estimate, and we stick to it.
Yes, our West Palm Beach crews carry common hinge sizes, drawer glides, soft-close mechanisms, and edge banding so many repairs can be completed on the first visit. For full door or cabinet box replacements, we order to spec and schedule the install once materials land. We also work with KraftMaid, Cambria, and Silestone lines when the project calls for them.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
