Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The West Palm Beach Owner’s Guide
Tamko fence installation in West Palm Beach typically runs $3,500 to $9,000 for a complete vinyl privacy fence, including tear-out of the old line, new posts set in concrete, panels, gates, and hardware. We stock Tamko-compatible posts, panels, and gate kits locally, and we can usually get a crew on site within five to seven business days. Most homeowners discover the problem when a wind gust snaps a post at ground level, or when a panel starts rattling against the rails after years of salt air and afternoon thunderstorms.
If you already own a Tamko fence and a section has failed, you’re not shopping for a whole new yard. You’re shopping for a match: the right panel profile, the right post-to-rail connection, the right color batch so the repair doesn’t look like a patch. That’s a different job than a generic vinyl fence swap, and it’s the job we’re set up to do in West Palm Beach.
Key takeaways:
- Installed cost for full Tamko fence replacement runs $3,500 – $9,000 in West Palm Beach, with partial section repair usually well under half that.
- We install Tamko, but we are not a Tamko dealer; we are an independent contractor (Bradford Remodeling Co West Palm Beach) that works with Tamko-compatible materials and documented aftermarket equivalents.
- Florida sun and soil do specific things to vinyl fence posts: UV embrittlement, ground-line cracking, and wind fatigue are the three we see most.
- Every quote is a written price before work starts. No reprice at the door. The 365-Day Done Right Promise covers any install that doesn’t hold for a full year.
Which Tamko Models This Applies To
Tamko’s vinyl fence program runs through three series: the Envision line, the Apex line, and the Heritage line. Envision is the economy residential product, Apex is the mid-grade with thicker wall sections and a better warranty, and Heritage is the commercial/heavy-gauge line you’ll see on HOA projects and larger estate lots. The panels from one series do not interchange with the posts from another series without modification. That’s the first compatibility gotcha: if your fence was built with Apex panels and you order Envision rails because they were cheaper, the post routings won’t line up at the same heights.
The second gotcha is color. Tamko’s “Tan” from 2019 is not the same batch as Tamko’s “Tan” from 2024. Vinyl pigment shifts with each manufacturing run, and Florida UV exposure fades the installed product further. If you need a section match, we sample the installed fence and order from the current production inventory, then allow the new material to weather for 30 to 60 days if you can live with a visible seam for a couple of months. If you can’t, we typically recommend replacing the full line on a visible elevation rather than one random panel.
Identifying your series without paperwork is simple in most cases: measure the wall thickness of the post with a caliper. Envision posts run about 0.130″ wall thickness, Apex around 0.150″, Heritage 0.180″ or better. The post caps and rail routings also differ by series. If you’re not sure, we can identify it in person before we quote anything.
On the OEM-versus-aftermarket question for Tamko specifically: Tamko’s own panels hold color better than most aftermarket vinyl in the first five years, but so-called “generic” vinyl from name-brand extruders like Westlake or Ply Gem often matches profile and color at 20 – 30% less. We give you both numbers and let you choose. We stock the Tamko Envision and Apex profiles on our trucks for repair work, plus a set of aftermarket rails and post sleeves for the most common installations throughout Palm Beach County.
Styles & brands we work with
Signs Your Tamko Fence Installation Is Failing
- Post leans at the ground line. In West Palm Beach, the concrete footings settle in sandy soil during heavy rain seasons, and the post can start leaning even if the vinyl post itself is still sound. If the concrete hasn’t cracked, we can sometimes re-plumb the post and re-set the rails; if the post wall has split at the concrete line, that post needs replacement.
- Panel rattles inside the rail slots. Vinyl expands and contracts with Florida heat. Over time, the routed rail slots wear loose and the panel no longer seats tight. This is almost never a panel replacement; it’s a rail re-seat with new shims or an aftermarket clip upgrade.
- Bottom rail sagging or cracked. The bottom rail carries all the vertical weight of the panel, and in West Palm Beach’s humid summers, a cracked bottom rail means the entire panel now hangs its weight on the pickets. Left alone, the pickets start to crack at their mid-heights. Bottom rail replacement is the cheapest fix;
- Gate won’t close square. Gate posts take more lateral stress than any other component. A Tamko gate post that’s only set in a 24″ footing (common on older installs) will drift out of square within a few seasons. We re-hang with through-bolted hinges at minimum, and in wetland-adjacent lots we’ll pull and reset the post in a deeper, wider footing.
- White vinyl yellowing or streaking. Not all discoloration is a failed product; a lot of what looks like yellowing is actually algae and air pollution that collects in the micro-texture of the panel surface. Before we quote replacements for cosmetic issues, we clean a test section. If it’s genuine UV degradation, the surface will chalk and lose its sheen even after cleaning, and replacement is the only fix.
Replacement Cost & What’s Included
Full Tamko fence installation in West Palm Beach runs $3,500 to $9,000 for a standard residential lot, and that price includes tear-out and disposal of the old fence, new concrete for every post, Tamko or matched-aftermarket panels and rails, gate hardware, and final grading around the post bases. Partial repairs run proportionally: a bottom-rail replacement is a few hundred dollars, a single post re-set is usually under $600, and a gate re-hang is under $900 depending on hardware.
What drives the range: linear footage (obviously), the series you’re matching (Heritage material runs 40% above Envision), soil conditions in your yard (sandy fill near Lake Worth Lagoon can require deeper footings), and whether the old fence was set in concrete or just backfilled with sand. We write the line-item price before we touch a shovel. That’s the whole model: straight number, full scope, no surprises on the invoice.
Our work carries the 365-Day Done Right Promise in writing: if a post shifts, a panel breaks at a seam, or a gate goes out of square within a year of install, we come back and correct it at no charge. No argument, no prorating, no “that’s normal settling.”
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can check a lot without a tool belt: look at the concrete at the base of each post, check the rail-to-post joints for movement, and run your hand along the pickets for cracks near the bottoms. Those observations help us give you a more accurate over-the-phone estimate. What you shouldn’t do is try to pull a leaning post back vertical by hand, or cut a panel to fit a gap without measuring the rail slot depth. Vinyl under tension is brittle, and a mishandled section can split in a way that turns a $300 repair into a $3,000 replacement.
If the failure is at the post footing, leave it alone. Posts set in concrete need care to extract without damaging the surrounding grade or the adjoining panels. That’s also where we’ve seen the most after-the-fact damage from well-meaning owners who tried to fix a lean with a bottle jack and a two-by-four. If you’re not sure whether it’s a simple rail re-seat or a footing failure, call (728) 203-9809 and describe what you see. We’ll tell you straight whether it’s worth a service call.
FAQs
Expect 20 to 30 years on the panels and 15 to 20 on posts in West Palm Beach’s salt-air, high-UV environment; posts usually fail before panels, mostly at the ground line where moisture and soil chemistry work on the material. Call (728) 203-9809 for a condition assessment if your posts are showing ground-line cracks.
Most panel failures that show as rattling, sagging, or picket cracks can be repaired with new rails, shims, or aftermarket clips, but a shattered panel section needs replacement; we’ll only quote you a new panel when repair genuinely won’t hold. Call (728) 203-9809 and describe what you’re seeing; we’ll tell you which one you’re dealing with.
A standard residential lot takes 2 to 4 working days from tear-out to final grade, depending on linear footage and whether we’re matching an existing color batch that needs lead time. We schedule the crew and the material together, so we don’t show up and then leave a hole in your fence line for a week.
We carry Tamko Envision and Apex rails, pickets, post sleeves, and gate hardware on our trucks for common repair calls in West Palm Beach, plus matched aftermarket equivalents; Heritage-series material is typically ordered to spec because it’s not a everyday residential item. If we can’t fix it on the spot, we’ll give you the written price before we leave.
Contact Bradford Remodeling Co West Palm Beach
You want a Tamko fence that stands straight, matches its color, and holds square through hurricane season. We price it in writing, schedule the crew around your life, and stand behind the work for a full year. Curtis Lane runs every estimate personally, and he doesn’t write a number he wouldn’t put on a signed contract.
Call (728) 203-9809 for a free, no-pressure Tamko fence installation quote in West Palm Beach. A live person answers, day or night. You’ll get a straight number, full scope, and no surprises after the invoice.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
