







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Fence Installation: The West Palm Beach Owner’s Guide
Oldcastle fence installation in West Palm Beach typically runs $3,500 to $9,000 for a full perimeter job, with most residential projects landing between $4,500 and $6,500 depending on linear footage, gate count, and soil conditions. We stock Oldcastle-compatible panel sections, posts, gate hardware, and concrete footing materials on our trucks, so most installations start within one to two weeks of your written quote. If you’re reading this, you probably have a section of Oldcastle fence that’s leaning, cracked, or pulling loose at the post line and you want to know what it costs to fix it right.

Here’s what we tell every West Palm Beach homeowner who calls about Oldcastle fence work: the panels themselves rarely fail first. What fails is the post footing and the connection hardware. South Florida’s sandy soil, high water table, and hurricane-season wind loads put constant lateral pressure on fence posts. Oldcastle makes a solid precast concrete fence system, but even a well-made post sitting in a shallow footing will start to lean within five to seven years if it wasn’t set below the frost line with proper drainage. That’s the repair we do most.
Key Takeaways:
- Installed Oldcastle fence replacement in West Palm Beach: $3,500 – $9,000 for a typical residential project
- Most failures trace back to post footings and hardware, not the precast panels
- Every quote is written, line-itemed, and locked before we start
- The 365-Day Done Right Promise covers the work for a full year after install
Which Oldcastle Models This Applies To

Oldcastle’s precast concrete fence line covers several series that show up regularly in West Palm Beach neighborhoods. The most common we work with are the StoneWall SELECT, StoneWall CLASSIC, and the older Westminster panel profiles. Each series uses a different panel thickness and post-channel depth, and they are not interchangeable. You cannot drop a SELECT panel into a CLASSIC post channel without field-modifying the post, which weakens the connection and voids any manufacturer warranty.
Here’s the compatibility gotcha that costs owners money: Oldcastle has changed post-channel dimensions twice in the last 15 years. A fence built in 2010 may have posts with a narrower channel than panels sold today. If you order replacement panels online without measuring the channel width, you’ll end up with panels that don’t seat. Before you spend a dime, measure the inside width of the post channel at the top and bottom. That’s the first thing we check on any estimate. We match OEM Oldcastle panels where they’re available and use only manufacturer-spec aftermarket equivalents when a series has been discontinued. An aftermarket panel that doesn’t match the original aggregate mix will look like a patch job from the street.
Bradford Remodeling Co West Palm Beach is an independent contractor. We are not affiliated with or authorized by Oldcastle. We install and repair their systems because they’re common in this market and we know them well.
Styles & brands we work with







Signs Your Oldcastle Fence Installation Is Failing
- Leaning posts at the gate line. The gate’s weight and swing cycle put more stress on posts than any other point in the fence. A gate post that’s off plumb by even a half inch means the footing has started to yield. If you leave it, the gate will bind, the post will creep further out, and you’ll eventually be looking at a full post re-set rather than a gate adjustment.
- Cracks radiating from post corners. Precast posts crack under uneven soil settlement. In West Palm Beach, we see this after heavy wet season rains when sandy soil washes out around the footing and the post suddenly has no lateral support. A hairline crack is cosmetic. A crack that widens toward the bottom means structural compromise.
- Panels shifting or rattling in wind. Oldcastle panels are heavy, but they should seat snugly in the post channel. If you can wiggle a panel by hand, the connection hardware or channel has worn. Loose panels become projectiles in a hurricane. That’s a safety issue, not an appearance issue.
- Gate dragging on the latch side. This is almost never a hinge problem. It’s a post problem. When the hinge post settles, the gate plane tilts and the latch post takes the entire misalignment. Replacing the latch or shimming the hinge only masks it. The footing under the hinge post is the real repair.
- White chalky residue at panel edges. That’s efflorescence from water moving through the concrete. In a humid coastal market like West Palm Beach, some efflorescence is normal in the first year. Ongoing efflorescence after multiple years means water is channeling through the panel consistently, which slowly degrades the aggregate bond.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In West Palm Beach, Oldcastle fence installation runs $3,500 to $9,000 for a complete residential project. Per-linear-foot pricing lands around $55 to $85 installed, including precast panels, posts, concrete footings, and standard gate hardware. The spread comes from four things: total linear footage, how many gates you have, what soil condition our auger hits when we dig footings, and whether you’re repairing or replacing the existing post line.
What’s included in our price: removal and disposal of old fence sections and failed posts, augered footings set below the recommended depth for Florida’s sandy soil profile, new posts and panels matched to your existing Oldcastle series (or full replacement if the series is discontinued), gate re-hang and hardware alignment, and a clean site at close. What’s not included, and what we’ll tell you if you ask: irrigation line repairs if a footing lands on one, and any HOA-facing documentation you may need. We flag both before work starts so the number doesn’t move at the door.
Every project carries the 365-Day Done Right Promise. If the fence fails inside a year due to our workmanship, we return and correct it at no charge. That’s written into the contract, not implied.
DIY or Call Us?
You can safely check a few things yourself: measure the post channel width, note which panels are loose or cracked, and check whether any posts have hollow-sounding footing areas after a heavy rain. That information helps us give you a faster written quote. What you shouldn’t do is pull panels out of a leaning post alone. A single Oldcastle precast panel weighs between 80 and 140 pounds depending on series and height. A panel that’s already shifted can drop without warning. We’ve seen panels pin guys against their own trucks when they tried to save a few hundred bucks.
Post footing repair is not a shovel job either. In West Palm Beach, you need an auger to get below the settlement zone, and you need to know how to set a post in sandy subgrade without over-pouring concrete into a bowl that holds water. Get it wrong and the new post leans again in 18 months. We’re set up for this work with the right equipment and a crew that does it weekly. If you want a straight number before you decide, call (728) 203-9809 and we’ll schedule a walk-through and a written quote.
FAQs

An Oldcastle precast fence installed with proper footings and drainage in West Palm Beach typically lasts 15 to 25 years before individual posts or panels need attention. The fence system itself is durable. The weak points are the footings and gate hardware, which South Florida’s sand, water table, and wind load wear down faster than the concrete. If your fence is failing at year seven, it’s almost always a footing installation issue from the original build, not a panel quality issue.
A leaning Oldcastle post can usually be repaired by removing the panel, extracting the post, re-augering the footing, and resetting the same post if it isn’t cracked. We do this regularly in West Palm Beach. If the post itself is cracked through or the base has spalled, replacement is the better call. The repair runs less than a full fence rebuild, but it has to be done before the lean migrates to the adjacent posts.
A standard residential Oldcastle fence installation in West Palm Beach takes two to four working days from layout to final gate adjustment, assuming we’re not fighting rock or replacing an entire post line. Post repair on a single section is typically a one-day job. We’ll give you a scheduled window in writing with your quote, and we’ll call you if anything in the field changes that timeline.
We stock common Oldcastle panel profiles, post caps, gate hinges, and latch hardware on our service vehicles, along with the concrete and aggregate materials we need for proper footings in West Palm Beach’s sandy soil. If your specific series is discontinued or we need to order a color-matched replacement, we’ll tell you before you sign anything and factor the lead time into the written schedule. Call (728) 203-9809 and we’ll confirm what we have for your series.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.


