Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The West Palm Beach Owner’s Guide
A Mr-Glass kitchen remodel in West Palm Beach typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much of the existing layout changes. We stock and install Mr-Glass-compatible cabinet systems, glass inserts, and trim packages, and in most cases we can have a crew on site within a week of your written estimate. The call usually comes after a hinge lets go, a glass door panel cracks, or a drawer slide shears off mid-pull, and the homeowner realizes the part was never meant to be sourced from a big-box shelf.
Most owners discover the failure the hard way: a cabinet door that won’t stay closed, a glass panel that’s fogged between the panes, or a soft-close slide that’s gone stiff and crunchy. These are wear items, especially in South Florida humidity, and once one goes, the others on the same run usually aren’t far behind.
Which Mr-Glass Models This Applies To
Mr-Glass cabinetry and glass-front kitchen systems come in a handful of series lines that share hardware but not always door profiles. The compatibility gotcha we see most often in West Palm Beach homes is this: the hinge cup drilling pattern on the Mr-Glass Contemporary line is 35mm, same as the Classic line, but the door thickness differs by 3mm, so a Classic hinge mounted on a Contemporary door sits proud and throws the reveal off. We match the part to the door, not the cabinet box, every time.
To identify what you have, open the door and look at the hinge cup. Mr-Glass etches the series code on the inside of the cup, usually two letters followed by four digits. That code, plus the door width and glass panel thickness, gives us everything we need to pull the right replacement. When OEM parts are backordered, we carry aftermarket equivalents from Hafele and Blum that match the bore pattern and weight rating. For most Mr-Glass cabinets, the aftermarket option is indistinguishable in function and roughly 20-30% less expensive.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with Mr-Glass, but we work on their products regularly and keep the common failure parts in our West Palm Beach shop.
Styles & brands we work with
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Door sag or uneven reveal. The hinge plate has wallowed out the mounting holes in the cabinet stile. Florida’s humidity expands the particle board core, the screws lose bite, and the door drops a quarter inch. The fix is a new hinge plate and sometimes a thread insert, not just cranking the adjustment screw.
- Glass panel fogging. The seal between the panes on an insulated glass insert has failed. Once moisture is inside, it cannot be dried out from the outside. This is a panel replacement, and it’s the most common Mr-Glass failure we see within eight years of installation in coastal air.
- Drawer slide grind or stick. The ball bearings inside the soft-close slide have corroded or the nylon rollers have flattened. In West Palm Beach, slides within ten feet of a dishwasher or sink fail noticeably faster than the rest of the kitchen because of the heat and moisture cycles.
- Soft-close mechanism stops engaging. The damper piston inside the hinge or slide has blown its seal. It’s a small part, but once it goes, the door slams, and the slamming accelerates wear on every other component in that cabinet run.
- Glass rattles in the frame. The rubber glazing gasket has dried and shrunk. This is a cheap part and a fast fix, but if ignored, the glass panel will crack at the corner from repeated vibration.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A partial Mr-Glass kitchen refresh in West Palm Beach, think new doors, drawer fronts, hinges, and slides, typically lands between $8,000 and $15,000. A full rework with new cabinet boxes, glass inserts, and countertops runs $14,000 to $45,000 depending on how much of the kitchen changes structurally. A single glass panel replacement usually falls in the $300 to $900 range installed, and a full hinge-and-slide retrofit across a 10-cabinet kitchen runs roughly $1,200 to $2,800.
These prices include the written line-item estimate before any work starts, the parts, the labor, the cleanup, and the signed 365-Day Done Right Promise in your hand at close. The range moves based on the Mr-Glass series you have, whether we’re matching existing finishes or refinishing, and what surprises are hiding behind the old cabinets. You will know the number before we open a single box.
DIY or Call Us?
Some things you can safely check yourself. If a door is sagging, you can tighten the hinge plate screws and adjust the reveal with a Phillips screwdriver. If a drawer is sticking, you can pull it out, wipe the slides clean, and check for a loose mounting screw. Those are reasonable homeowner tasks.
What you should not do is attempt to replace a glass panel yourself. The panels are tempered, and when tempered glass is torqued or dropped, it shatters into a thousand small pieces without warning. Removing a panel from a Mr-Glass frame requires the right glazing tools and gloves. We have done this swap hundreds of times in West Palm Beach kitchens, and the whole job usually takes under an hour. If the project is bigger than a hinge adjustment, call (728) 203-9809 and we will give you a straight number.
FAQs
Most hinges and slides in a Mr-Glass kitchen last 10 to 15 years in our climate, but panels within six feet of a dishwasher or sink often show seal or corrosion failure at the 7 to 9 year mark due to repeated heat and humidity cycles. Call (728) 203-9809 if you’re seeing early failure, and we’ll assess whether it’s a part defect or environment.
No. Once the seal between the glass panes fails and moisture gets inside, the panel cannot be resealed from the outside. The panel gets replaced with a matching unit. Estimates are free, and the replacement usually ships within a week.
A single hinge, slide, or glazing gasket swap is done in under an hour on site. A full hinge-and-slide retrofit across a 10-cabinet kitchen takes about half a day, and a whole-kitchen Mr-Glass refresh runs one to two weeks.
We keep the most common Mr-Glass failure parts in our West Palm Beach shop, including hinges, slides, dampers, glazing gaskets, and a few standard glass panel sizes. Specialty panels and finishes are ordered to spec. We also stock compatible hardware for KraftMaid, Cambria, and Silestone kitchens.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
