Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The West Palm Beach Owner’s Guide
If you have a Mr-Glass shower enclosure, mirror, or glass panel that’s cracked, clouded, leaking, or pulling away from its frame, the installed replacement cost in West Palm Beach runs $9,000 to $28,000 depending on scope, glass type, and how much of the surrounding tile and substrate has to come out with it. That’s the honest range for a full bathroom remodel involving Mr-Glass components, not just a pane swap. Most owners discover the problem after a seal lets go and water works its way behind the glass, or after a door roller wears out and the panel starts dragging on the track.
A failed seal is not something to wait on. Glass in a Florida bathroom lives in heat and humidity year-round, and once moisture gets between the glass and the frame, corrosion starts doing what corrosion does. We stock common Mr-Glass hardware on the truck: rollers, hinges, gaskets, and sweep seals. If the glass itself is compromised, we measure, order the replacement, and schedule the install without making you chase parts across three suppliers.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with Mr-Glass, and we don’t pretend to be. What we do is match the right part to the right model, give you a written price before any work starts, and stand behind it for a full year.
Which Mr-Glass Models This Applies To
Mr-Glass has produced several shower enclosure lines over the years, and the compatibility gotcha is real: the door hardware from a 2010-era framed unit does not interchange with the frameless or semi-frameless lines that followed. If you’re holding a broken roller, the stamping on the wheel or the screw spacing on the bracket tells us more than the brand name ever will. We’ve seen homeowners buy a “universal” roller kit online only to find the offset is wrong by a quarter inch and the door hangs crooked.
The cleanest way to identify your part is to look for the etching or corner badge on the glass. Mr-Glass typically etches the model number in the lower corner of the fixed panel. If you can’t find it, measure the glass thickness (3/8 inch and 1/2 inch are the common ones here), the door width, and the hole spacing on any hinge or handle. That gets us to a match faster than a model name. For most Mr-Glass enclosures, OEM hardware is still the best call because the pivot geometry is specific. Aftermarket rollers and sweeps exist, and some are decent, but we’ll tell you when the savings isn’t worth the gamble.
Styles & brands we work with
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Water pooling outside the shower. The sweep seal at the bottom of the door has hardened or worn down to nothing, and water is running under the glass. The fix is usually a replacement sweep, but if it’s been leaking for months, the curb and subfloor need checking too.
- The door scrapes or sticks. Rollers lose their bearing smoothness in humid Florida air, especially in homes without a strong exhaust fan. Once a roller flat-spots, the door drags and the track starts wearing unevenly.
- Cloudy glass that won’t clean. Hard water from West Palm Beach’s municipal supply etches the glass surface over time. Once it’s etched, no cleaner brings it back, and the panel needs replacement or a professional reglaze if the etching is shallow.
- The frame pulls away from the tile. The silicone bead that seals the frame to the wall has aged out, and now the frame is moving. That movement lets water behind the enclosure, which is how you end up with mold in the wall cavity and tile popping loose.
- Hinge screws that won’t stay tight. The screw holes in the wall-side jamb have stripped or the anchors have corroded. Tightening them again just makes the hole bigger. The fix is solid blocking behind the tile, not a longer screw.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a complete Mr-Glass bathroom remodeling job runs $9,000 to $28,000 installed. That covers the glass enclosure, new pan, tile work, plumbing rough-in adjustments, and the finish details. A smaller job, like replacing a glass panel and resealing the frame, lands lower on that range. What drives the number is glass type (frameless costs more than framed), glass thickness, whether the subfloor or wall substrate has water damage, and whether we’re pulling permits.
Every quote we write in West Palm Beach is a line-item written price. Parts, labor, materials, disposal, and the workmanship warranty are listed separately. You will not get a reprice at the door. Curtis Lane reviews every estimate before it lands in your hand, and if something changes in the field, you hear about it before we touch it.
DIY or Call Us?
You can replace a sweep seal yourself. You can also tighten a loose handle. Beyond that, Mr-Glass repair gets into structural territory fast. Frameless glass panels weigh more than most people expect. A 3/8 inch tempered glass door panel can run 80 pounds or more, and when one of those comes off its hinge wrong, it doesn’t end well. Tempered glass also does not crack gracefully; it shatters into a thousand small pieces.
If water has been leaking behind the enclosure, the DIY path stops at the tile. You need someone who can open the wall, find the rot or mold, and rebuild the substrate properly. That’s what we do. Call (728) 203-9809 and we’ll send a uniformed technician to take a look, tell you what we found, and put a written number in front of you. Straight number, full scope, no surprises after the invoice.
FAQs
Framed enclosures typically last 15 to 20 years in West Palm Beach’s humidity, while frameless glass can last 25 years or more since there’s less metal to corrode. We’ve replaced plenty of units in the 10 to 12 year range when the house lacked good ventilation. Call (728) 203-9809 if you want us to assess what you’ve got.
No. Tempered glass cannot be repaired once cracked. The panel must be replaced, and because tempered glass is cut before it’s tempered, the new panel is measured and ordered to fit your specific opening. We handle the measuring, ordering, and installation. Call (728) 203-9809 for a free estimate.
Most hardware swaps, like rollers and sweeps, are done the same visit. A full replacement panel or complete enclosure remodel runs 1 to 3 days depending on whether tile and waterproofing work is required. We’ll give you a written schedule before we start.
We carry common Mr-Glass-compatible rollers, hinges, sweep seals, gaskets, and handles on the truck. Glass panels are ordered to spec from our suppliers. We also work with parts for KraftMaid, Cambria, and Silestone product lines when a remodel touches multiple rooms.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
