







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The West Palm Beach Owner’s Guide
Moen doesn’t manufacture driveway pavers. If you’re holding a Moen product, you’re holding a faucet, a showerhead, a garbage disposal, or a kitchen sink. The failed part you’re chasing belongs to your hardscape, not your plumbing. We stock and install paver driveways in West Palm Beach using documented materials from Belgard and Unilock, with a typical installed price range of $7,000 to $18,000. If your driveway is crumbling, pooling water, or dropping pavers, this page tells you exactly what you’re dealing with and what it’ll cost to fix.

Most West Palm Beach homeowners discover a driveway problem the same way: a paver sinks after a heavy afternoon storm, an edge collapses where the lawn meets the concrete, or the sand joints wash out after hurricane season. The failure is rarely a single paver. It’s almost always what’s underneath.
Which Moen Models This Applies To

Here’s the clarification you need before spending another minute on this. Moen makes plumbing fixtures, and only plumbing fixtures. If you have a Moen kitchen faucet, a Moen shower system, or a Moen garbage disposal, we service those too, and we keep common Moen cartridges and replacement parts on our trucks. But there is no Moen model line for driveways, pavers, or hardscape of any kind. You won’t find a Moen paver, a Moen driveway base, or a Moen edge restraint because none exists.
The part you’re looking for is the paver itself, or more likely, the failing base beneath it. For paver driveways in West Palm Beach, that means a concrete paver from a manufacturer like Belgard or Unilock, set over a compacted aggregate base, with polymeric sand in the joints. If you’re trying to match an existing paver, you need three measurements: length, width, and thickness. West Palm Beach paver driveways are typically built with 60mm pavers, but 80mm is standard for anything taking vehicle traffic. The color and finish matter just as much. A faded paver pulled from a driveway that’s seen ten Florida summers will never match a fresh one from the same lot, so we blend from multiple pallets and take from less visible areas when we patch.
Styles & brands we work with







Signs Your Moen Driveway & Pavers Is Failing
- Sinking or dipping pavers near the driveway edges. This almost always means the base has eroded from underneath, usually because water is running under the edge where the driveway meets the lawn or a planter bed. The paver itself is fine. The structure below it has moved.
- Sand washing out of the joints after every rain. Polymeric sand hardens when it cures, but if it was installed over a wet base or not swept and compacted correctly, it never binds. You’ll see piles of loose sand at the low end of the driveway after a West Palm Beach downpour.
- Paver edges that spread or open up at the border. Without a proper concrete edge restraint, the outside pavers get pushed outward by the weight of vehicles and the expansion of the base. The driveway slowly grows wider, and the joints stretch until pavers start popping loose.
- Pavers that crack under normal vehicle weight. A paver that cracks is usually sitting on a void, not a solid base. Either the base wasn’t compacted in lifts, or organic material was left under the driveway and has since rotted away, leaving a hollow pocket.
- Weeds or grass growing through the joints. This means the sand joint has failed completely and organic material is taking root. If you don’t address it, the roots push pavers apart and the problem accelerates.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full paver driveway installation in West Palm Beach, plan on $7,000 to $18,000 depending on square footage, the paver product you choose, and how much of the existing base is salvageable. A partial repair – re-setting a sunken section, re-compacting the base, replacing broken pavers and re-sanding the joints – typically runs $1,000 to $4,000 depending on the size of the affected area and the condition of the base underneath.
Every Bradford Remodeling Co West Palm Beach driveway project includes a written price before any work starts. You’ll see the paver cost, the base material, the labor, and the disposal separated line by line. No number moves at the door. We pull permits where West Palm Beach requires them, and when the job closes, you get a signed written guarantee in your hand. If the work fails inside one year, under the 365-Day Done Right Promise, we come back and correct it at no charge.
DIY or Call Us?
You can check a few things without touching a tool. Walk the driveway after a storm and mark every paver that rocks or shifts underfoot. Watch where water pools and where it runs off. That inspection tells you the scope of the problem, and it costs nothing.
What you shouldn’t do is pull pavers and start rebuilding the base on your own. Compacting base material correctly takes a plate compactor, and if you skip the compaction or set pavers on loose fill, the same sinking returns in six months, only now you’ve spent your weekends and a rental fee to make it worse. West Palm Beach soil drains fast in some pockets and holds water in others, and knowing where you’re building on one or the other changes everything about how deep you dig and what you put down. Call us at (728) 203-9809. We’ll walk the site, give you a straight number, and tell you exactly what’s under your pavers before anyone touches a shovel.
FAQs

A properly installed paver driveway with an 80mm paver over a compacted aggregate base should last 25 to 30 years in West Palm Beach, with joint sand replenishment every 3 to 5 years. The pavers themselves rarely fail first. It’s the base that gives out, usually from water migration or poor compaction. Call (728) 203-9809 if your driveway is less than 10 years old and already showing sinkage – that’s a base problem, not an age problem.
Most sunken or spreading sections can be repaired without replacing the entire driveway. We pull the affected pavers, re-compact the base, add material where it’s washed out, reset the pavers, and re-sand the joints. If the base failure is widespread, you’ll spend less replacing the full driveway than patching it section by section every few years. Call (728) 203-9809 for an exact quote – estimates are free.
A typical sectional repair – pulling, re-compacting, and resetting a sunken area – takes one to two days on site. A full paver driveway replacement in West Palm Beach usually runs three to five days, including demolition, base work, paver installation, and joint sanding. Either way, you’ll have a written schedule before we start, and the site is clean when we leave.
We stock Belgard and Unilock pavers through our documented supplier network and order direct for West Palm Beach projects, so you don’t handle procurement. We code every material spec into your written estimate, so you know the manufacturer, the color, and the thickness of the paver going into your driveway before any work starts. Call (728) 203-9809 and we’ll pull samples and pricing for your exact layout.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.


