Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The West Palm Beach Owner’s Guide
If you have a Jerith kitchen and it’s showing its age, a full Jerith kitchen remodel in West Palm Beach typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether we’re moving plumbing or electrical. Most owners call us after the cabinet faces start delaminating at the edges or the hardware no longer holds a door square in humid months. The signs usually stack up slowly: a drawer that rubs, a hinge that sags, a counter seam that’s opened up just enough to catch a thumbnail.
We stock and install Jerith-compatible kitchen remodeling components in West Palm Beach, and we match existing hardware, cabinet profiles, and countertop overhangs so you’re not living with a mismatch between old and new. Bradford Remodeling Co West Palm Beach is an independent contractor, not a Jerith dealer or affiliate. What that means for you is we can quote the work honestly without being tied to one manufacturer’s parts book. If a Jerith-specific part has a long lead time, we’ll tell you that before we start, not after your sink is out.
Which Jerith Models This Applies To
Jerith’s kitchen lines vary by era, and the identifying details are usually inside a cabinet door or on the underside of a drawer box. Look for a printed label with a model prefix and date code: older Jerith cabinetry from the 1990s and early 2000s used face-frame construction with 3/4-inch doors and hidden hinges that mounted differently than today’s soft-close hardware. Newer Jerith lines moved to frameless construction, which changes how we set drawer glides and how much reveal you’ll see between doors.
The gotcha we run into most in West Palm Beach is that Jerith changed hinge cup dimensions between production runs. A 35mm cup hinge from one year won’t always seat correctly in a door bored a year earlier, even on the same model line. Before we quote a kitchen remodel, we open a sample door and measure the bore, overlay, and face-frame width. That tells us whether your existing boxes are worth keeping or whether you’re better off replacing the cabinets entirely while the wall is open. On the OEM-versus-aftermarket question: for structural parts like hinge plates and drawer glides, we use the Jerith OEM part when it’s still available and not backordered. For soft-close dampers and shelf pins, quality aftermarket equivalents from our documented vendor list hold up the same and cost less. We’ll line-item both options and let you decide.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Cabinet doors won’t stay closed or hang crooked. The hinge plates have worn or the screw holes in the face frame have wallowed out from years of humidity cycling in West Palm Beach. Tightening the screw usually makes it worse once the wood fiber is gone.
- Drawer glides bind or stick halfway. Ball-bearing glides wear unevenly when they were installed slightly out of square. On Jerith cabinets, we see this most on the pot-and-pan drawer, which carries the most weight.
- Laminate edges are peeling or lifting at the bottom rail. Florida humidity finds the seam where the laminate wraps the door edge. Once water gets under the laminate, the substrate swells and the only real fix is a new door or a full reface.
- Soft-close stops working on half the doors. The damper cylinders inside the hinge cup lose their fluid over time. On Jerith models with integrated damper hinges, you replace the hinge, not the damper.
- Counter seams have opened or show dark staining at the joint. Seams that were cut tight in a northern climate open up when the substrate expands in heat and humidity. A stained seam means water’s been sitting in the joint, and that’s a substrate issue, not a surface issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a Jerith kitchen remodel ranges from $14,000 to $45,000. A tighter scope, like refacing existing Jerith boxes with new doors and drawer fronts, lands at the lower end. Replacing everything, including cabinets, countertops, backsplash, and rough-in plumbing for a new sink location, pushes toward the upper end. Countertop material moves the number: a Laminate countertop on Jerith base cabinets costs $2,000 – $6,500 installed, while Cambria or Silestone quartz raises that line item meaningfully.
Every quote includes the full written price before any work starts, a line-item breakdown of parts and labor, and the 365-Day Done Right Promise on the completed work. If a cabinet door sags, a drawer binds, or a seam fails within the first year, we return and correct it at no charge. The written price is the price, full stop.
DIY or Call Us?
Some things you can check before calling: open each door and drawer, note where it catches, and check the hinge screws with a manual screwdriver to see if they’re stripping. That tells us a lot before we even arrive. But cabinet refacing and countertop replacement on Jerith kitchens is not a weekend project. Setting frameless cabinets square in a house that’s settled, scribing a countertop to an out-of-level wall, and getting seams tight in West Palm Beach humidity takes tools most homeowners don’t own and a feel for when to shim versus when to plane.
Curtis Lane has done enough Jerith remodels in West Palm Beach to know where the install manual stops making sense. If the work you’re looking at involves electrical rough-in, plumbing moves, or pulling the old countertop while the sink is still connected, call us at (728) 203-9809 before you start. The free estimate costs you nothing, and you’ll know exactly what the scope should be, even if you end up doing some of the demo yourself.
FAQs
Jerith kitchen cabinets in West Palm Beach typically last 15 to 25 years, but the humid season shortens that for lower cabinets near the sink and dishwasher. If your cabinets are over 20 years old and you’re seeing swelling at the toe kick or delamination at the door edges, a reface or full replacement is usually a better investment than chasing individual door fixes. Call (728) 203-9809 for an honest read on what’s left in your boxes.
Yes, Jerith cabinets can often be repaired if the boxes are square and the face frames are intact. We replace worn hinges, rebuild stripped screw holes with the right filler and re-bore, swap damaged drawer glides, and reface doors when the underlying substrate is still dry. If water has swollen the box itself, repair becomes false economy. We’ll tell you which situation you have before you spend a dollar.
A typical Jerith kitchen remodel in West Palm Beach takes 3 to 8 weeks from demo to final walkthrough, depending on cabinet lead times and whether plumbing or electrical rough-in moves. A cabinet reface is usually 1 to 2 weeks. Before we start, you’ll have a written schedule with dates tied to the scope, so you know when the countertop template, cabinet install, and final inspection happen.
We keep common Jerith-compatible components on the truck: 35mm and 42mm cup hinges, soft-close damper clips, drawer glide sets, shelf pins, and touch-up kits in standard finishes. Specialty parts like matched door profiles or full drawer boxes are ordered per job with lead time stated in your written quote. Call (728) 203-9809 and we can verify what’s on the truck for your specific Jerith model.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
