Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The West Palm Beach Owner’s Guide
We stock and install Jerith-compatible bathroom remodeling hardware and enclosure components throughout West Palm Beach, with a full bathroom remodel typically running between $9,000 and $28,000 depending on scope, materials, and how much of the existing rough-in we can reuse. Most owners discover they have a problem when a shower door starts dragging, a hinge pin backs out, or a base track starts spitting water onto the bathroom floor. If you’re reading this, chances are you’ve already spotted one of those signs and you want to know whether it’s a $200 fix or a full gut.
Here’s the straight answer: Jerith makes solid aluminum and tempered glass enclosure systems, and most failures we see are in the hardware, not the glass. A bad roller assembly, a corroded hinge, or a warped bottom track is a parts swap, not a remodel. But if the framing has pulled out of the wall or the threshold has rotted the subfloor beneath it, you’re into real remodeling territory. Curtis Lane has been running jobs along the Northwood Village corridor long enough to know which one you’ve got before the second cup of coffee.
Key Takeaways:
- Full Jerith-compatible bathroom remodel in West Palm Beach: $9,000 – $28,000 installed.
- Hardware-only repairs (rollers, hinges, tracks) run far less and are usually same-week work.
- We provide a written price before any work starts, and every job carries the full-year 365-Day Done Right Promise.
- Call (728) 203-9809 for a free estimate. A live person answers, day or night.
Which Jerith Models This Applies To
Jerith doesn’t stamp every component with a series number the way some manufacturers do, and that’s the first compatibility gotcha. What you’ll usually find is a small foil label on the door frame or the bottom rail with a five- or six-digit production code. Write that down before you call us. The second identifier is measurement: Jerith bypass doors commonly run in 1/2-inch increments from 48 to 72 inches wide, with header heights either 76 or 80 inches. If your opening is an oddball size, it was a custom order, and that changes which track and roller kit we pull for you.
The real split in Jerith product is alloy thickness and glass weight. Their economy-series enclosures use thinner wall aluminum and 3/16-inch glass, while their heavier builder-grade lines carry 1/4-inch glass and a beefier bottom rail. Mixing hardware between those two thicknesses is where DIY installs go sideways. As an independent service provider, we’re not affiliated with Jerith, but we match OEM specs where they matter and use quality aftermarket roller assemblies where the aftermarket part actually outlasts the original. In West Palm Beach’s salt air and humidity, that’s not marketing talk; it’s what the failed parts on our bench tell us.
Styles & brands we work with
Signs Your Jerith Bathroom Remodeling Is Failing
- Shower door drags or catches mid-track. The nylon roller bearings have flattened or the roller axle has corroded. In Florida’s humidity, steel axles rust even inside a bathroom, and once the roller stops rolling, the track starts wearing instead.
- Water appears at the outside corner of the threshold. The vinyl sweep on the bottom of the door has stiffened and cracked, or the track weep holes are clogged with soap scum. Either way, water is wicking into the substrate, and in West Palm Beach that substrate is often a wood-framed floor that doesn’t dry fast.
- Hinge pin works its way up or the door sags toward the strike side. The hinge leaf screws have stripped out of the aluminum jamb, or the wall anchor behind the frame has failed. This is a structural problem, not a hardware problem, and tightening the same screw into the same stripped hole won’t fix it for more than a week.
- Aluminum shows white chalky powder at the corners. That’s electrolytic corrosion where the anodized finish has failed. It’s cosmetic initially, but once the corrosion creeps under the glass channel, the frame can’t hold the glazing gasket and you’ll get glass rattle and leaks.
- Bottom track has soft spots or the door rocks when you push on it. The track was bedded on caulk only, or the floor under it has moved. In older West Palm Beach homes with original tile and mud beds, the mortar can crack and settle, leaving the track unsupported exactly where the glass weight sits.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith-compatible bathroom remodel in West Palm Beach runs $9,000 to $28,000. Where you land in that range is driven by glass panel count, finish selection, whether we’re doing a tub-to-shower conversion or working within an existing footprint, and how much of the old framing and waterproofing has to come out. Hardware-only repair, like swapping rollers and a bottom track, usually stays well under a thousand dollars installed.
Every estimate we write is line-itemed: materials, labor, and any permit fees shown separately. You get that written price before we touch a single tool, and the number doesn’t move unless you change the scope, in which case we call you first. The 365-Day Done Right Promise covers the completed work for a full year. If something fails in that window, we come back and correct it at no charge. Compare that to the industry habit of dodging calls after the check clears and you’ll see why we put it in writing.
DIY or Call Us?
Replacing a roller assembly on a Jerith bypass door is the kind of job a patient homeowner can handle with a screwdriver and a putty knife, and we’ll tell you exactly what to check first: isolate which roller is worn, verify the door edge clearance, and check that the top guide hasn’t been bent by someone leaning on the panel. But anything involving the glass panel itself, the wall anchors, or the bottom track over a tile mud bed is where we’d rather see you stop.
Tempered glass is under internal tension. Nick the edge with a tool and the whole panel can shatter into a thousand cubes. And pulling a track off a rotted threshold without addressing the substrate underneath just guarantees you’ll do the job twice. If you’re not sure which situation you’re in, call (728) 203-9809. We’ll walk through it on the phone, give you a straight answer, and if it needs a tech visit, the estimate is free.
FAQs
With maintenance, the glass should last 20 years or more; the hardware typically goes in 7 to 12 years in Florida humidity. Rollers and door sweeps are wear items, and we’d expect at least one hardware refresh over the life of the glass. Call (728) 203-9809 if yours is acting up and you want an honest read on whether it’s maintenance or replacement.
Yes, if the glass is intact and the framing is still anchored properly, repairs run only a few hundred dollars. We rebuild the roller set, straighten or replace the top guide, and bed the track with a proper sealant instead of just re-caulking the edges. The free estimate at (728) 203-9809 will tell you which side of that line you’re on.
Most complete bathroom remodels in West Palm Beach take two to four weeks from demo to final walkthrough. We give you a written schedule with the written price, and we call you before a change is made, not after. Call (728) 203-9809 to get a realistic timeline for your specific scope.
Our techs carry common Jerith roller assemblies, top guides, hinges, and door sweeps in the truck, along with aftermarket kits that match the glass thickness on most series. If yours is a custom or discontinued size, we quote a lead time before you approve the repair. Get an exact answer at (728) 203-9809.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
