Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The West Palm Beach Owner’s Guide
If you have an IKO window or door with a failing sash, roller, or weather seal in West Palm Beach, we can source the correct replacement part, confirm it matches your model, and install it for between $250 and $900 depending on the component. We keep common IKO hardware on our trucks, and our technicians can measure your unit and confirm compatibility before ordering anything. Most owners discover the problem the same way: a window that suddenly drags when you open it, a door that no longer closes square against the jamb, or a draft along the frame that wasn’t there six months ago. In West Palm Beach, salt air and humidity mean those failures show up faster than they do inland, and once a seal lets go, the damage compounds through a wet season or two.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with IKO, but we work on their windows and doors regularly, and we can match parts by model, measurements, and the unit’s original spec sheet.
Which IKO Models This Applies To
IKO windows and doors run across several residential product lines, and the part that fixes one won’t necessarily fit another. The critical detail is the unit’s dimension and the series code printed on the label, usually found on the inside edge of the sash or the door’s hinge side. Newer IKO vinyl casement and awning windows use a concealed hinge and a multi-point lock with a gearbox that reads out in millimeters; older single-hung units use a block-and-tackle balance that is sized to the sash weight. Mixing those up is the most common compatibility mistake we see. If the label is worn off, we measure the visible glass, the sash thickness, and the hardware mounting holes to identify the right series before ordering a single part.
For IKO parts specifically, the OEM-vs-aftermarket decision matters in two areas: weatherstripping and balance assemblies. OEM IKO weatherstripping is extruded to the frame channel’s exact profile, and it seals tighter than generic vinyl. Aftermarket balance assemblies from a reputable manufacturer are usually as good as the original and sometimes outlast it, but they must be selected by sash weight, not just by length. Curtis Lane has seen more than one homeowner order a “universal” balance from a catalog, install it, and then call us when the sash slams shut on the second day. The wrong tension on a balance will wreck a sash in West Palm Beach heat quickly. We spec the correct rating by weighing the sash, not by guessing.
Styles & brands we work with
Signs Your IKO Windows & Doors Is Failing
- The window is suddenly hard to open or close. Usually, it’s a worn balance or a roller that has flattened on one side. In West Palm Beach, the salt in the air accelerates corrosion on metal roller bearings even inside the track.
- You feel a draft even when the window is closed and locked. The weatherstripping has compressed or pulled away from the frame. Once compressed, it won’t spring back, and the unit’s air seal is gone.
- The door drags or scrapes at the bottom corner. The hinges have worn, or the door slab has settled slightly. Forcing it closed every time just makes the hinge wear faster and starts damaging the threshold.
- The lock or latch won’t catch smoothly. On IKO multi-point locks, one worn gear tooth will stop the whole mechanism from engaging. On older units, a striker plate that has shifted by an eighth of an inch can do the same thing.
- Condensation fogs the glass and won’t wipe off from either side. The insulated glass unit’s seal has failed. In West Palm Beach’s humidity, a failed seal lets moisture into the air space permanently, and the only fix is replacing the glass unit itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you pay depends on which part failed and whether it needs a straightforward swap or requires pulling the sash or the door slab. Here’s a real breakdown of what we quote in West Palm Beach:
- Weatherstripping or seal replacement: $250 – $450 installed, including removing the old material and cleaning the channel.
- Balance, roller, or hinge replacement: $350 – $650 installed per unit, depending on access and whether the sash or slab must be removed.
- Multi-point lock or gearbox replacement: $450 – $900 installed, including re-alignment of the locking points with the striker plates.
- Failed insulated glass unit replacement: $600 – $1,200 installed, depending on glass size, glazing type, and whether the frame requires disassembly.
Every quote is a written price before any work starts. That’s The Garrison Standard, and there are no numbers that move at the door. The written quote lists the part, the labor, the disposal of the old component, and any adjustment needed to make the window or door operate correctly. The completed work is covered by our 365-Day Done Right Promise: if the repair fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some of this is safe to check yourself. You can look for a worn weatherstrip, confirm a lock won’t catch, and note exactly where a door drags. You can also read the model label on the sash so you have the series and size in hand when you call. What we would not recommend is pulling apart a multi-point lock or removing a sash with a tensioned balance. Those balances are under load, and a released one can take off a finger or shatter the glass. Same caution applies to any door hinge replacement that requires pulling a heavy slab; get the door on a support stand or it will drop. If you’re at all unsure, call (728) 203-9809 and describe what you’re seeing. We’ll give you a straight answer on whether it’s a simple fix or a service call, and an estimate before anything is scheduled.
FAQs
In West Palm Beach’s coastal climate, we typically see IKO frames and sashes last 20 to 30 years, while hardware like balances, rollers, and seals lasts 7 to 12 years before they need replacement. The frame will outlive the components, which is why replacing the part is almost always smarter than replacing the unit. Call (728) 203-9809 for an exact assessment of your window or door.
Some components can be adjusted or lubricated to buy time, but seals, balances, and lock gears usually need replacement once they have failed. A bent hinge can sometimes be re-aligned, but a seized roller or a stripped gearbox is a replacement job. We’ll tell you which one you have before we quote anything.
Most IKO part replacements take 45 minutes to 2 hours on site, depending on whether we need to remove the sash or door slab. Multi-point lock replacements on French doors take longer because every locking point has to be re-aligned with its striker after the new gearbox is in. We’ll give you a firm time window before the job starts.
We stock common IKO weatherstripping, rollers, hinges, and balance hardware on our service trucks, and we carry a reference set of IKO hardware profiles at our West Palm Beach shop for matching by measurement. Specialty lock gearboxes or insulated glass units are typically ordered and arrive within a few business days. If you’re unsure what you need, call (728) 203-9809 and we’ll identify the part from your description or photo.
We work with other name-brand hardware for kitchens and baths too, including KraftMaid, Cambria, and Silestone. The IKO-specific work follows the same rule as everything else we do: straight number, full scope, no surprises after the invoice. Written price before work starts, a uniformed technician who knows the trade, and a signed guarantee in your hand when the job closes. Call (728) 203-9809 for a free estimate on your IKO window or door repair.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
