Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The West Palm Beach Owner’s Guide
We stock and install CWS-compatible windows and doors in West Palm Beach, with most replacement parts running $450 to $4,500 installed depending on what failed. Window replacement on a CWS home typically lands between $4,500 and $15,000 when full units are involved, and impact-rated CWS systems run $8,000 to $25,000. You usually know something’s wrong when a sash sticks, a roller grinds, condensation fogs the glass, or a door won’t latch square anymore. In South Florida’s salt air and humidity, we see CWS hardware fail faster than the frames themselves.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with CWS, but we work on their windows and doors regularly across West Palm Beach, and we know which parts hold up and which ones don’t in this climate.
Which CWS Models This Applies To
CWS builds several window and door lines, and the parts are not all interchangeable. The CWS 990 series uses a different roller assembly than the CWS 9500 series, and the hinge geometry changed between model years. If you have the original paperwork, the model number is printed on a silver sticker on the frame edge or the top rail of the sash. No sticker? We measure the sash thickness, the roller housing width, and the glass thickness at the job walk – that tells us what we’re ordering before we quote a number.
The OEM-versus-aftermarket decision matters with CWS specifically because their older lines used proprietary balance springs. A generic replacement spring gets the window open, but it won’t hold tension the way the original did, and you’ll be fighting that window inside a year. We stock OEM CWS parts for common failures, and we’ll tell you plainly when a quality aftermarket equivalent saves money without changing how the window operates. If a customer asks for a cheaper part that won’t survive one West Palm Beach summer, we tell them that too. Straight number, full scope, no surprises after the invoice.
Styles & brands we work with
Signs Your CWS Windows & Doors Is Failing
- Sticking or hard-to-slide sashes. Rollers wear flat on the bottom, and the sash starts dragging on the track. In West Palm Beach, salt air accelerates that wear, especially within a mile or two of the coast. Replace the rollers early and the track survives; wait too long and the track gets gouged.
- Fogged or cloudy insulated glass. The seal between the panes has failed, and humidity has gotten inside the unit. This isn’t a cleaning problem. The glass unit itself needs replacement, and on CWS impact-rated windows that’s a bigger job than swapping a single pane on an older aluminum frame.
- Door sagging or dragging on the threshold. A CWS hinged door that won’t latch cleanly usually means worn hinge pins or a top hinge pulling loose from the jamb. It’s fixable, but if you keep forcing it, you’ll damage the latch hardware and the door itself.
- Crank-out windows that skip or don’t seal. The operator gear strips, and the sash stops pulling tight against the weatherstripping. Air leaks through, and in August that’s money leaking through your electric bill.
- Locking hardware that binds or won’t engage. Corroded or bent strike plates are common on CWS doors we see in West Palm Beach. A window or patio door that won’t lock is a security problem, not just an annoyance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed prices in West Palm Beach for CWS parts and units run like this:
- Window roller or balance spring replacement: $45 to $180 per window
- Hardware or lock replacement: $75 to $250
- Insulated glass unit replacement: $250 to $1,100 per sash
- Full CWS window replacement: $450 to $1,600 per window (non-impact)
- Impact-rated CWS window replacement: $800 to $2,500 per window
- CWS patio or entry door replacement: $1,500 to $4,500 installed
What drives the range? The size of the unit, whether it’s impact-rated, whether the sash or frame is salvageable, and how much interior trim has to come apart. Every job gets a written price before work starts – that’s The Garrison Standard, and it’s non-negotiable. The written quote lists parts, labor, and what we do with the old unit. And every completed job carries the 365-Day Done Right Promise. If the part or the install fails within a year, we come back and correct it at no charge. That promise is in writing on every project.
DIY or Call Us?
Some things a homeowner can safely check: clean the tracks, inspect for visible corrosion on rollers, and confirm whether the sash is out of square by measuring diagonally. Fixing what you find is a different story. CWS impact windows are heavy – a large sash can run 80 to 120 pounds – and removing one with a failed balance spring means controlling that weight while working from a ladder. A dropped sash breaks glass, damages tile or furniture, and can seriously hurt whoever’s in the way. Balance springs are under tension. If you don’t know how to release them safely, don’t guess. This is one of those situations where calling a professional isn’t the cautious option; it’s the only sensible one.
Call us at (728) 203-9809. We’ll put eyes on the window or door, tell you what actually failed, and quote the fix in writing. If Curtis Lane does the walk himself, you’ll get the same number he’d give his own mother.
FAQs
In West Palm Beach, CWS aluminum frames can last 25 to 40 years, but hardware – rollers, balances, operators, and locks – typically wears out in 8 to 15 years. Salt air, humidity, and direct sun speed that clock up, especially for homes near the Intracoastal. Glass seal failures happen sooner here than in drier climates, usually at the 12-to-20-year mark. Call (728) 203-9809 if you’re seeing fogging or sticking sashes, and we’ll tell you whether it’s a hardware swap or a full-unit replacement.
Yes, if the frame is still square and the glass is intact, we can usually replace rollers, balances, locks, or operators for a fraction of a full-unit replacement – think $75 to $250 instead of $800 to $2,500. We’ll only recommend replacement when the frame is rotted, the track is grooved beyond repair, or the glass seal has failed. Call (728) 203-9809 and describe what’s happening; we’ll give you an honest read over the phone first.
Most hardware replacements – rollers, balances, locks, or operators – take 30 to 90 minutes per window once the part is in hand. A full window replacement with trim work runs a half day to a full day depending on the number of openings. We schedule the work, order the part before we arrive, and clean the site before we leave. Call (728) 203-9809 to schedule a walk-through and we’ll give you a written timeline.
We keep common CWS roller assemblies, balance springs, and latch hardware on the truck for the model lines we see most often in West Palm Beach. Uncommon or impact-rated components are ordered from our supplier before we schedule the install, so you’re never paying for a second trip. We also stock parts for KraftMaid, Cambria, and Silestone for cabinet and countertop work. Call (728) 203-9809 and we’ll confirm whether your part is on the truck or needs a day to order.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
