Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Roofing: The West Palm Beach Owner’s Guide
Bradford Remodeling Co West Palm Beach stocks and installs CWS-compatible roofing, with typical installed repair costs in West Palm Beach running $400 – $1,800, and full CWS roof replacement between $8,000 and $20,000 depending on square footage and decking condition. Most readers land here because they’ve spotted a water stain on the ceiling after a hard Florida downpour, or found granule grit piling up at the base of their downspouts, or heard a loose section of roofing rattle during one of our late-summer squalls. Whatever brought you to this page, we’ll tell you exactly what failed, what it costs to fix, and whether you can wait a week or need it handled before the next storm rolls through.
One thing up front: Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with CWS as a manufacturer, but we install and repair CWS-compatible roofing materials every week across West Palm Beach, and we keep common replacement components on the truck so the job doesn’t stall waiting on a shipment.
Which CWS Models This Applies To
CWS roofing systems in Florida run on a few distinct product lines, and the replacement part you need depends on which one is on your roof. The most common CWS installations we see in West Palm Beach are their architectural asphalt shingle line and their standing-seam metal panel system. The shingle line is the one that shows age first in our climate; the metal line fails less often but costs more to match when a panel gets creased by storm debris. If you have the original paperwork from installation, the product code is stamped on the back of the warranty card: shingle lines start with CWS-AR (architectural) or CWS-3T (three-tab), and metal panels carry a CWS-SS prefix. No paperwork? We can identify the product from a single lifted shingle or a removed panel before we ever order material, so you’re not paying for a guess.
The real compatibility gotcha with CWS is that their architectural shingle changed dimension in 2019. Older CWS-AR shingles measured a standard 39⅜” x 13¼” with a 5⅝” exposure; the newer run is slightly narrower at 13⅛”, which corners installers who don’t know the difference into hiding a bad seam with tar. That seam is the first place a West Palm Beach summer will find. On the metal side, CWS standing-seam panels use a 1¾” snap-lock seam, not the 1½” seam used by most other manufacturers, so aftermarket panels that look identical will not interlock. For CWS specifically, we recommend OEM materials whenever the roof is under manufacturer warranty or is less than five years old; beyond that, a quality aftermarket equivalent with the same wind rating and impact class gets you the same performance for typically 15 – 20% less. We’ll quote both and let you decide.
Styles & brands we work with
Signs Your CWS Roofing Is Failing
- Granule loss at the gutter line. CWS architectural shingles shed surface granules as the Florida sun breaks down the asphalt matrix. If you see a steady accumulation of dark grit in your gutters or at downspout elbows, your shingles are entering the back half of their service life. In West Palm Beach’s UV index, that typically starts around year 12 on sun-facing slopes.
- Ceiling stains that darken after rain. A brown ring on the ceiling that appears or darkens within 48 hours after a storm usually means a failed shingle seal or a punctured underlayment, not a plumbing leak. CWS shingle seals weaken fastest on southern exposures in West Palm Beach, where afternoon heat cooks the adhesive and lets wind lift the tab. The leak you see is often 4 to 8 feet uphill from the stain.
- Lifted or flapping shingle tabs. Walk the property line after any storm and look for shingle edges that aren’t lying flat. A lifted CWS tab may look minor, but on a West Palm Beach afternoon, a seabreeze gust can strip a whole course in minutes once the seal is broken. This is the number one call we get with CWS roofs between June and October.
- Rust streaks or white oxidation on metal panels. CWS standing-seam panels are galvanized and coated, but in our coastal air, scratches from tree debris or install damage expose the substrate. You’ll see rust blooms within two years of the scratch. Catching it early means a coated repair patch; missing it means replacing the full panel once the corrosion has eaten through.
- Water staining on fascia or soffit boards. When CWS drip edge or flashing fails, water wicks behind the gutter and rots the fascia board the gutter is mounted to. In West Palm Beach’s humidity, that rot spreads fast, and a $400 flashing repair turns into a $1,800 fascia replacement inside a single wet season if it’s left alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
CWS roofing repair in West Palm Beach runs $400 – $1,800 for most part replacements. The floor of that range covers a small flashing or seal repair with materials and labor; the top end covers structural decking repair under several shingle courses. Full CWS roof replacement runs $8,000 – $20,000, with the spread driven by square footage, roof pitch, decking condition, and whether we’re matching CWS OEM materials or a quality equivalent. Every quote is a written, line-item price before work starts. No numbers move at the door.
What’s included in every repair or replacement: the parts themselves (OEM or specified equivalent, called out on the quote), removal and disposal of the failed materials, any decking or underlayment repair required to meet current South Florida wind-load code, all fasteners and sealants rated for our coastal exposure, and the full written warranty. Bradford Remodeling Co West Palm Beach covers every completed job with the 365-Day Done Right Promise: if the repair fails inside a full year, we come back and correct it at no charge. We also install all CWS-compatible roofing to manufacturer spec so the manufacturer’s material warranty stays intact.
DIY or Call Us?
There are two things an owner can safely do before calling. First, from the ground, photograph any lifted shingles, rust streaks, or missing flashing after a storm so you can describe exactly what you’re seeing when you call. Second, check your attic on a bright afternoon for pinholes of daylight through the decking; that tells us where the breach is before we even set a ladder. That’s where the safe DIY ends. Roof work in West Palm Beach means working on a hot, often steep surface with a real risk of a fall, and CWS metal panels have sharp factory edges that open hands to the bone. If electrical or water damage has already entered the home, there’s an additional risk you can’t evaluate from the attic. Straight number, full scope, no surprises after the invoice. If you’ve got a failed CWS roof component, call us at (728) 203-9809 and we’ll get an honest assessment on the books.
FAQs
We see CWS architectural shingles in West Palm Beach running 15 – 20 years on well-ventilated roofs with regular maintenance, and their standing-seam metal panels going 35 – 50 years before needing major work. The variable is exposure: south-facing slopes lose years in direct sunlight, and roofs within a half-mile of the Intracoastal pick up salt corrosion that shortens both. A 45-minute inspection will tell you exactly where your roof sits in its service life. Call (728) 203-9809 to schedule a look.
Small, isolated failures can usually be repaired: a single lifted shingle course, a failed pipe boot flashing, or a rust-scratched metal panel all have field repairs that last years. What generally cannot be repaired is widespread granule loss across multiple shingle courses, seal failure on more than 20% of the roof, or metal panel corrosion that has perforated through the panel metal. In those cases, a repair just buys you seasons, and we’ll tell you that plainly rather than sell you a band-aid. Estimates are free.
A single-part CWS repair (flashing, shingle course, or single metal panel) is done in 3 – 6 hours, and we usually complete it in one visit because we stock the common CWS-compatible parts on our trucks. A full CWS roof replacement on an average West Palm Beach home takes 2 – 4 working days, with decking repair and hurricane-strapping inspection included in that window. Before any work starts, you’ll have a written scope with the completion date and the exact parts list.
We stock the common CWS-compatible repair parts on our trucks: replacement shingles in the standard West Palm Beach colorways, pipe boot flashings, drip edge, sealants, and the fasteners used on CWS metal seams. Non-stock CWS items, like a custom-colored standing-seam panel or an OEM warranty replacement piece, come direct from our supplier and we’ll tell you the lead time on the quote. If we can’t get a true OEM part, we’ll never substitute without your written approval on the part number difference.
The written price you sign is the price you pay, unless we open the roof and find something no contractor could have seen from the surface, like rotten decking under a shingle course or termite damage under a metal panel. If that happens, Curtis Lane calls you before we touch the next board with the exact added cost and the reason. Nothing gets billed that you didn’t approve in writing.
If you’ve got a CWS roof that’s losing granules, lifting tabs, or leaking at the flashing, call Bradford Remodeling Co West Palm Beach at (728) 203-9809 for a free estimate. A live person answers, we give you a written price, and the work carries the 365-Day Done Right Promise: if it fails in the first year, we come back and make it right at no charge. We also carry parts and finish work for KraftMaid, Cambria, and Silestone installations across West Palm Beach, so the same crew that handles your roof can keep the interior moving too.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
