Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Windows & Doors: The West Palm Beach Owner’s Guide
Boxabl window and door replacement in West Palm Beach typically runs $450 – $1,800 per opening installed, depending on whether we’re swapping a standard casement window, a sliding glass door, or a custom-sized unit. We stock common Boxabl-compatible sizes on the truck and most single-unit swaps are done the same day. The typical discovery is quiet: a window that no longer seals tight against morning humidity, a door that drags against the frame after the summer heat expands the jamb, or condensation fogging between the glass panes that just doesn’t clear.
If you own a Boxabl in West Palm Beach, you’ve already learned that these units don’t use off-the-shelf big-box sizes. They’re built to modular specifications, which means the windows and doors are sized to the panel openings, not to whatever Home Depot has in aisle 12. We keep that in mind on every Boxabl job we take. Bradford Remodeling Co West Palm Beach is an independent service provider, not affiliated with Boxabl, and we approach these units as a known quantity: specific dimensions, specific mounting details, specific failure points. Curtis Lane has walked enough of these installs to know exactly what’s behind the trim before we open the wall.
Which Boxabl Models This Applies To
Boxabl’s Casita line accounts for nearly all units in the West Palm Beach area, and its windows and doors follow a consistent pattern: aluminum-frame windows with insulated glass, a standard swing entry door, and sliding glass doors on the wider wall sections. The compatibility gotcha most owners miss is that Boxabl units built in different production batches have used slightly different frame depths, which means a window that physically fits the rough opening may still sit proud of the interior wall by a quarter inch if you order from the wrong supplier.
Before we quote any window or door, we check two things: the label on the interior frame edge (which carries the batch stamp) and the actual glass dimensions. If the label is gone, which is common on units that have been through a few Florida summers, we measure the glass pack itself, not the frame opening. That’s how you avoid the wrong-size-aftermarket mistake. For Boxabl specifically, OEM parts are available through the manufacturer and match perfectly, but they’re slower to source and marked up sharply. Quality aftermarket equivalents made to the same dimensions cost 30 – 40% less and use the same insulated glass construction. We’ll quote both and tell you plainly which one we’d put in our own unit.
Styles & brands we work with
Signs Your Boxabl Windows & Doors Is Failing
- Condensation you can’t wipe off – Fog between the glass panes means the seal has failed and the argon or krypton fill is gone. In West Palm Beach humidity, this is the number one failure we see. The window still functions, but it’s lost its insulation value and will only get worse.
- A door that scrapes or won’t latch – Boxabl door frames are aluminum, and Florida’s heat-soak cycles expand and contract them every single day. A latch that worked in January and binds in August isn’t your imagination. The frame has moved, and the fix is a realignment or replacement, not a shave of the striker plate.
- Water staining around interior trim – If you’re seeing brown bloom around the window corners or under the sliding door track after a heavy storm, the exterior seal has breached. Water is getting behind the flange. Left alone, this rots the subfloor or panel backing, and that’s a much larger bill.
- A sliding door that’s heavy or grinding – Roller bearings wear out, especially on Boxabl units where the door is being opened and closed to a lanai or patio every day. When the door starts feeling like it weighs 300 pounds, the rollers are done and the track is likely damaged too.
- Gasket material cracking or falling out – The black weatherstripping around window sashes and door edges breaks down under UV exposure. Once it’s brittle, you’re losing air conditioning through the frame, and your electric bill in a West Palm Beach summer will reflect it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the straight number for West Palm Beach Boxabl work. A standard casement or awning window replacement runs $450 – $900 installed. A sliding glass door runs $900 – $1,800 installed, depending on whether we’re replacing the entire frame or just the panel and rollers. The entry door lands between $700 – $1,400. Every quote includes the part, the labor to remove the old unit and set the new one, re-flashing and sealing to Florida code, and haul-away of the old unit.
| Part Type | Installed Price Range (West Palm Beach) |
|---|---|
| Casement / awning window (per unit) | $450 – $900 |
| Entry door | $700 – $1,400 |
| Sliding glass door (full frame) | $900 – $1,800 |
| Sliding door panel & roller replacement | $300 – $600 |
| Weatherstripping / seal rebuild (per unit) | $125 – $350 |
The range moves based on whether it’s a standard batch size or a custom-cut panel, and whether water damage has gotten into the surrounding framing. We write the price before we start, and it doesn’t move unless we find rot inside the wall and call you first. Every Boxabl window and door install carries the 365-Day Done Right Promise: if the work fails inside a year, Bradford comes back and corrects it at no charge.
DIY or Call Us?
A Boxabl window or sliding door swap is not a weekend YouTube project. The units are set with exterior flanges and sealed against hurricane-force rain, and getting the flashing wrong means water intrusion into a panelized wall that’s much less forgiving than stick framing. You can safely check your own gaskets for cracking, note where condensation is appearing, and measure the glass size for your own reference. You should not attempt to pull a window or door frame out of a Boxabl panel. That’s where DIY savings turn into a $3,000 water damage bill.
If you’d rather not learn that lesson the hard way, call us at (728) 203-9809. We’ll come out, identify the batch, quote the part, and get it swapped. Straight number, full scope, no surprises after the invoice.
FAQs
Expect 10 – 15 years from the insulated glass and aluminum frames in coastal Florida weather before seals start failing and frames show real wear. The UV and salt air in West Palm Beach compress that lifespan compared to inland climates. Call (728) 203-9809 and we’ll tell you whether yours are at the repair stage or the replace stage.
Yes, in specific cases: roller swaps, weatherstripping rebuilds, latch realignment, and glass-pack replacement (where we replace only the sealed glass unit, not the whole frame) are all repair jobs we do regularly. Full replacement is needed when the frame itself is bent, corroded, or has been water-damaged. We’ll quote the repair first if it’s honest work, and tell you if it’s not.
A single window swap takes 2 – 3 hours from start to cleaned-up finish. A sliding glass door replacement runs 4 – 6 hours including frame removal, setting, flashing, and trim. We schedule single openings as half-day jobs so you’re not waiting around all day.
We stock common aftermarket sizes for the Boxabl Casita on the truck and can install them same-day in most cases. OEM parts are special-ordered and take 1 – 3 weeks depending on the manufacturer’s current inventory. We’ll give you both options with prices before you decide.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
