Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The West Palm Beach Owner’s Guide
If you have a Boral roof in West Palm Beach and a tile or component has failed, you need a direct answer: we stock Boral-compatible roofing materials, we know the product lines, and a typical repair runs $600 – $2,500 installed depending on the extent of the failure. That’s the number we work from, and it’s the same number whether we’re quoting a single cracked tile or a section of underlayment that’s given up after a storm.
Most West Palm Beach homeowners discover a Boral problem one of three ways: a ceiling stain inside the house, a tile that’s slid out of place after high wind, or a roofer’s inspection finding granule loss and cracked material that’s been soaking up Florida sun for years. The failure is rarely dramatic on day one. It’s cumulative. And by the time you see it from the ground, it’s been failing for a while.
We’re an independent contractor, not affiliated with Boral. We stock Boral-compatible tile, ridge cap, hip and rake pieces, and the fasteners and underlayment systems that go with them. If you call us, a live person answers, and we’ll walk you through what you’re looking at before we ever send a truck. Straight number, full scope, no surprises after the invoice.
Which Boral Models This Applies To
Boral’s roofing product lines in Florida break down into two main families: concrete roof tile and clay roof tile. Within those families, the profiles most common on West Palm Beach roofs are flat tile, low-profile barrel (often called S-tile), and high-profile barrel. The concrete tiles generally fall under the Boral USA / Boral Roofing brand, with common series names like Capistrano, Murcia, Barcelona, Verona, and Madrid. The clay tiles tend to carry names like Marseille, Cordoba, Barcelona Clay, and Tuscan.
Here’s a compatibility gotcha owners run into constantly: Boral tile profiles are not interchangeable across manufacturers, and they’re often not interchangeable across series even within Boral. A Barcelona flat tile is not the same size, thickness, or locking geometry as a Verona flat tile. If you’re replacing a few tiles, the replacement must match the original profile, the original color batch, and the original manufacturing plant’s die. Tile dimensions vary by plant. On the underside of most Boral tiles, you’ll find a molded identification marking or a plant code. We match by that marking, by measuring the tile’s length, width, and headlap, and by comparing the color and texture against Boral’s current production blends. For West Palm Beach homes built in the late 1990s and 2000s, that often means sourcing from Boral’s Florida production runs, which use different clays and pigments than their West Coast lines. The color shift is real. A tile that looks “close enough” on the truck will read as a patch job from the street.
OEM versus aftermarket matters more with Boral than with most brands. Boral’s concrete tiles have a specific density and a specific coating chemistry that resists the mildew and salt air we deal with here. There are aftermarket tile makers who produce “Boral-compatible” profiles. Some are fine. Some have different water absorption rates, which changes how the tile behaves on a West Palm Beach roof during monsoon-season wetting and drying cycles. For section replacements and any repair where water integrity matters, we recommend OEM Boral tile. For a single tile in an inconspicuous spot, a quality aftermarket match can work, but we’ll show you the color match before we install it.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Ceiling stains or peeling paint inside. This is the classic first signal that underlayment has failed under a tile. The tile itself may look fine from the ground. The problem is underneath. Boral tile is a water-shedding system, not a waterproof membrane. The underlayment does the waterproofing. When it fails, water gets through.
- Cracked or chipped tiles after a storm. In West Palm Beach, we see this most often after wind-driven debris impacts, or when a tree branch drags across the roof during a hurricane. A cracked tile channels water directly onto the underlayment, which accelerates its breakdown. One cracked tile is a $400 job. Three years of ignoring a cracked tile is a $2,500 section repair plus decking work.
- Granule loss and a chalky film in gutters. Concrete tiles shed fine granules as the coating weathers. Some shedding is normal. What’s not normal is finding piles of granules in your gutters quarter after quarter, or running a hand across the tile and coming away with a thick white chalk residue. That’s coating failure, and it means the tile’s UV protection is gone. Once that goes, the tile absorbs more water, gets heavier, and starts breaking down from inside.
- Slid, lifted, or missing tiles. Boral tile has a specific headlap requirement, typically 3 inches. When fasteners corrode or break, particularly near the eave and rake edges, tiles slide out of alignment. You’ll see a zigzag line along the roof where the pattern is no longer true. This is not cosmetic. Water entry points multiply when tiles shift, and West Palm Beach’s summer storms will find every one of them.
- Tile color fading to rust or brown tones. Boral uses iron oxide pigments in many of their concrete tile color blends. The coating is what keeps those pigments stable. Once the coating degrades, the tile starts oxidizing toward its natural cement base color, which is noticeably lighter and flatter. If your roof used to be a deep terracotta and now looks like faded brick, that’s coating failure, and it’s getting close to replacement time on the affected sections.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For West Palm Beach, Boral roof work breaks down like this: a single tile replacement runs $400 – $500 installed. A small repair involving a few tiles and spot underlayment work runs $600 – $1,200. A section repair where we’re pulling tile, replacing underlayment and battens, and reinstalling tile across a roof slope runs $1,200 – $2,500 depending on the square footage and pitch. A full roof replacement with Boral-compatible tile runs $8,000 – $20,000 depending on the home’s footprint, the number of roof planes, and whether the existing decking is sound or needs sections replaced.
Every quote includes the tile, the underlayment system, the fasteners, the labor, and the site cleanup. We don’t slot in a low number on the tile and then hit you with a “decking adjustment” when we open the roof. If the decking is suspect, we flag it before we write the price. If we find hidden damage after we open the roof, we call you before we spend another dollar. That’s The Garrison Standard, and it’s how we’ve run jobs since 2004.
All work carries our 365-Day Done Right Promise. If the repair fails within a year, we come back and correct it at no charge. That’s in writing, and you get a signed copy of the guarantee before we leave the site. No numbers that move at the door, no warranty that evaporates when the check clears.
DIY or Call Us?
We’re going to be straight with you: roof work in West Palm Beach is not a weekend project, and it’s not safe on a ladder leaning against a gutter. The falls are real, the heat on a tile roof in August is punishing, and the damage a homeowner causes walking on the wrong tile is often more expensive than the original problem. Concrete tile cracks under concentrated foot pressure. A homeowner goes up to “just look,” steps on an unsupported point, and now there are three cracks where there was one.
What you can safely do from the ground: check your gutters for granule buildup, look for obviously slipped tiles with a pair of binoculars, and check the ceiling inside after heavy rain. That tells us a lot when you call. What you should not do is get on the roof, pull tiles, or attempt to seal anything with a can of roofing cement. We’ve torn off too many “fixed” sections where the homeowner’s sealant trapped water instead of shedding it and rotted out a square of decking that would’ve been a $400 repair.
If you suspect a problem, call (728) 203-9809. A live person answers. We’ll talk through what you’re seeing, tell you honestly whether it needs a truck, and give you a written price before anything gets touched.
FAQs
Boral concrete tile roofs in West Palm Beach typically last 40 to 50 years if the underlayment is replaced on schedule, which in Florida means every 20 to 25 years. The tile itself can last longer, but the underlayment is the component that fails first in our climate. Call (728) 203-9809 and we’ll assess what yours has left.
A single cracked Boral tile cannot be reliably repaired; it needs replacement, and that replacement runs $400 to $500 installed. The crack compromises the tile’s water-shedding function, and West Palm Beach’s rain will exploit it. Call (728) 203-9809 for a written quote; we’ll match the profile, the color, and the plant code before we install it.
A single tile swap takes about an hour on site. A full underlayment and tile section repair takes one to two days depending on the square footage and the roof pitch. Getting the right tile matched to your roof is often the longest part of the process, which is why we handle sourcing before we schedule the work. Call (728) 203-9809 and we’ll give you the timeline with the quote.
We stock common Boral profiles and colors on the truck, including the flat, low-profile barrel, and high-profile barrel shapes most common on West Palm Beach homes. If your roof uses a discontinued color batch or an uncommon profile, we source it directly and show you the match before installation. Call (728) 203-9809 and we’ll tell you on the first call whether we have it on hand or need to order it.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
