Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The West Palm Beach Owner’s Guide
Boral fence installation in West Palm Beach typically runs $3,500 to $9,000 installed, depending on linear footage, gate count, and whether we’re pulling old posts or setting new ones. We stock Boral-compatible fence materials on the truck and can usually schedule the job within a week of the estimate. Most owners discover their fence failed the way you just did: a post snapped at the base after a storm, a rail split along the grain, or a gate sagged so far it drags against the concrete.
You’re not looking for a fence company that sells you whatever’s in the yard. You’ve got a Boral product, it’s failed or failing, and you need someone who knows the material well enough to match it, price it straight, and install it so it holds through the next hurricane season. That’s the work we do.
Which Boral Models This Applies To
Boral manufactures fence and decking products under a few different lines, and the compatibility details matter more than most homeowners expect. In West Palm Beach, the product we see most often is Boral’s EverNew line, a polypropylene-based composite that comes in board, rail, and post profiles. We also field calls about Boral’s TruExterior trim and siding products used as fence fascia or decorative caps, though that’s less common.
Here’s the compatibility gotcha most owners don’t know until they’re standing in the aisle: Boral fence posts are not dimensionally identical to pressure-treated 4×4 or 6×6 lumber. A Boral post sleeve fits over a structural core, and if you try to substitute a standard vinyl post, the rail brackets won’t seat correctly. We measure the post profile, the rail channel width, and the spacing between pickets before we order anything. That’s the only way to guarantee the new section matches what’s already standing.
On the OEM-versus-aftermarket question: Boral’s own components are what we recommend for structural pieces, posts, and rails. For trim caps, post skirts, and decorative toppers, quality aftermarket equivalents are usually fine and sometimes cost less. We’ll tell you where the difference matters and where it doesn’t, in writing, before you spend a dollar.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Post lean at the base. In South Florida’s sandy, fast-draining soil, improper footing depth is the number one cause. A post set in less than 24 inches of concrete will start leaning within the first two or three wet seasons. We set Boral posts in footings sized for the wind load, not just the fence height.
- Rail separation at the bracket. Boral rails lock into brackets, and when a bracket gets over-torqued during the original install, it cracks. The rail then works loose over time. This is a parts issue more than a material issue, and it’s usually repairable without replacing the whole panel.
- Visible warping or cupping on sun-facing sections. Boral products handle UV better than most vinyl, but the west-facing side of a West Palm Beach fence takes direct afternoon heat for years in a row. Warping there usually means the original install spacing was too tight and the material didn’t have room to move through thermal cycles.
- Gates dragging or failing to latch. The gate post is the hardest-working component on any fence. When it flexes, the gate drops, and you’re looking at a hardware fix plus a post reset. We see this in maybe a third of our Boral fence calls in West Palm Beach.
- Ground-level staining or algae growth. This is cosmetic, not structural, but it tells you drainage is pooling at the fence line. Left alone, the trapped moisture eventually works on the post base. We fix the grading issue when we reset the section so the problem doesn’t come back in two years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral fence installation in West Palm Beach, most jobs land between $3,500 and $9,000. The range comes down to three things: total linear footage, how many gates you have, and whether the existing posts can be reused or need to be pulled and reset. A gate adds roughly $400 to $900 depending on hardware and width. Pulling old posts and pouring new footings is the single biggest labor line item.
Every quote includes the material, the labor, the fasteners, the concrete, and the haul-away of the old section. We write the price down before we touch the first post, and that’s the number you pay. No add-ons at the door. The work carries our 365-Day Done Right Promise: if it fails within the first year, we come back and correct it at no charge. That guarantee is in writing, in your hand, at job close.
DIY or Call Us?
You can check a few things yourself safely. Walk the fence line and note which posts are leaning, which rails have gaps, and whether the gate still swings true. Take a tape measure and get the post dimensions and the panel width. That information makes our phone call faster.
What we don’t recommend is pulling posts or resetting them yourself. Digging in West Palm Beach means dealing with sandy soil that collapses as fast as you dig it, and the footing depth has to be right or the post won’t survive one storm season. If you hit a utility line, the problem goes from a fence repair to an emergency. We’ve also seen owners reattach rails with the wrong brackets and void whatever manufacturer warranty was still in play. If you’ve got a Boral fence that needs real work, call us at (728) 203-9809 and we’ll get eyes on it.
FAQs
A properly installed Boral fence lasts 25 to 30 years in South Florida, and the failure point is almost never the material. It’s the footing or the hardware. Boral’s composite resists rot, insects, and salt air better than wood and most vinyl. Call (728) 203-9809 if you want us to assess what you’ve got and tell you honestly how much life is left.
Yes, and that’s the more common job we do. If the posts are solid, we can replace individual rails, panels, or a failed gate without touching the rest of the fence. The repair usually starts around $900 and goes up from there. We’ll give you a written price either way, repair or full replacement, before you commit.
Most fence replacement or repair jobs in West Palm Beach take one to two days on site. Pulling and resetting posts adds time; the sandy soil here moves fast, which helps. We’ll give you a start date and a finish date in the written estimate, and we hold both.
We stock Boral-compatible posts, rails, brackets, and gate hardware on the truck, so most repairs go from estimate to finished job within the same week. For larger or unusual profiles, we run a material order, but that’s priced and timeline’d in the quote before you say go. Curtis Lane has been running jobs in West Palm Beach for years, and the thing that holds a fence together here is knowing what the soil does to a footing. We know. Call (728) 203-9809 for a free estimate on your Boral fence work.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
