A Bradford company - serving West Palm Beach, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower

American Standard Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in West Palm Beach
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

American Standard Roofing: The West Palm Beach Owner’s Guide

Bradford Remodeling Co West Palm Beach stocks and installs American Standard-compatible roofing materials, with most roof repairs in West Palm Beach running $400 to $1,800 installed and full replacements between $8,000 and $20,000 depending on square footage and decking condition. You’ll typically know something failed when you spot a water stain spreading across the ceiling after a hard Florida downpour, or when shingles start showing up in the yard after a summer squall. We keep common replacement components on hand and can match most American Standard roof assemblies without ordering weeks out.

Two construction workers installing wall cabinets during a kitchen remodel. nationwide

Call (728) 203-9809

What usually brings a West Palm Beach homeowner to this page is a roof that worked fine for years, then suddenly didn’t. South Florida sun beats on asphalt shingles until the granules wear off and the fiberglass mat underneath starts to dry and crack. Salt air from the Atlantic doesn’t help either. We’ve been running roofing jobs here long enough to know that a roof that looks fine from the curb can be failing from the underside, and that’s usually where the American Standard components show their age first: the underlayment, the flashing, the sealant at penetrations. Curtis Lane has walked enough West Palm Beach roof inspections to tell you straight: the part you see failing is rarely the whole story.

Which American Standard Models This Applies To

A wood double vanity with two mirrors after a bathroom remodel

American Standard’s residential roofing line covers three main series: the Weatherguard shingle line, the Stormshield metal panel system, and the Everlock tile profile. Each series uses its own fastening pattern, underlayment spec, and flashing kit, so matching the part to the series matters more than matching it to the roof’s age. The quickest way to identify what you have is to check the underside of a lifted shingle or the back face of a metal panel for the embossed series code. If that’s worn away, the fastener spacing will tell you: Weatherguard uses a six-nail pattern at 5-5/8 inches exposure, Stormshield panels lock at a 16-inch wide lip, and Everlock tiles key into a 3/4-inch interlock.

The OEM versus aftermarket decision on American Standard roofing is straightforward. For shingles and tiles, OEM matches the original color batch and wind rating, which matters if you’re patching rather than replacing. Aftermarket equivalents from GAF and Owens Corning are cheaper and carry their own warranties, but the color match will be close, not exact, and mixing brands on one slope can void the remaining manufacturer coverage on the OEM portion. For underlayment and flashing, we use aftermarket almost exclusively: synthetic underlayment from GAF outperforms the original felt in West Palm Beach humidity, and galvanized flashing with a longer vertical leg beats whatever came off the truck in the original build.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your American Standard Roofing Is Failing

  • Granules in the gutters or at the downspout elbows. This means the protective mineral surface is shedding. Once the asphalt layer beneath is exposed to Florida UV, the shingle bakes from the inside and starts curling at the corners within one to two summers.
  • Water staining on ceiling drywall or along exterior wall tops. By the time a stain shows, water has traveled through the roof deck and likely pooled on the drywall back. The entry point is often six to ten feet away from the stain, usually at a flashing joint or a penetration.
  • Lifted or flapping shingle edges after wind events. West Palm Beach building code requires wind-rated fastening, but sealant strips degrade with heat and age. When the seal fails, the shingle lifts at the leading edge and eventually tears at the nail line.
  • Rust streaks down the roof face or around roof penetrations. This points to failing flashing at a vent, chimney, or skylight. In coastal West Palm Beach air, untreated galvanized flashing rusts through in 12 to 18 years; marine-grade or stainless flashing lasts noticeably longer.
  • Soft spots in the roof deck when walking it. This is a decking issue, not a shingle issue, and it means the substrate has absorbed water long enough to lose structural integrity. A soft roof deck never heals; the affected plywood or OSB gets cut out and replaced before new underlayment goes down.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A low-threshold walk-in shower with a bench and grab bar

For West Palm Beach homes, roof repair on an American Standard assembly runs $400 to $1,800 installed, depending on how much flashing and underlayment needs to come up with the shingles. A full roof replacement lands between $8,000 and $20,000, driven mostly by square footage, decking condition, the series you’re replacing, and whether the old roof needs a tear-off or can be overlaid. Steep pitches and two-story homes push toward the upper end; a simple ranch with a low slope and good decking sits near the bottom. Every number we quote is a written line-item price before any work starts. No numbers move at the door.

What’s included: materials matched to your American Standard series, removal of the failed section (or full tear-off on replacements), decking inspection and replacement as needed, synthetic underlayment, flashing at all penetrations, and a clean site at close. The 365-Day Done Right Promise applies to every roofing job we complete. If the repair or replacement fails inside that year, we return and correct it at no charge. That guarantee is in writing, signed, in your hand before our crew packs up.

DIY or Call Us?

You can safely do a visual check from the ground: look for lifted shingle edges, missing granules, rusted flashing, and visible gaps at ridge caps or around pipes. We tell homeowners to do that walk once a month during hurricane season. What you should not do is get on a ladder with a tube of roof sealant and start caulking around penetrations. Roofing work in West Palm Beach means working on a hot, often slippery surface with wind gusts that come out of nowhere. Falls from roof height are serious, and most failed DIY patches end up costing more because water kept getting in while the sealant failed. If you suspect roof damage, call us at (728) 203-9809 and we’ll put eyes on it. The estimate is free, and the walk-up tells you more than any phone description will.

FAQs

A powder room with botanical wallpaper and a stone sink

Getting started with Bradford in West Palm Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your West Palm Beach team

A local crew that works across West Palm Beach and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in West Palm Beach? Licensed & insured · Free on-site estimates response · free estimates
Call (728) 203-9809
Local Service Coverage

Request a Free Estimate in West Palm Beach

Tell us what you need - Bradford Remodeling Co West Palm Beach responds fast. No obligation.

By providing your information above, you confirm you have read our Privacy Policy and authorize us to contact you via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch