Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Driveway & Pavers: The West Palm Beach Owner’s Guide
We stock and install Plant Prefab-compatible driveway and paver components throughout West Palm Beach, with most full driveway installs running $7,000 to $18,000 depending on square footage, paver grade, and substrate condition. If you’re looking at cracked pavers, a sinking section near the garage apron, or drainage that pools against your Plant Prefab home’s foundation, we can usually assess it within a day or two and have the written estimate in your hand the same visit. Most owners discover the failure after a heavy South Florida rain season, when soil shifts under the base and the pavers start telegraphing movement you can feel underfoot.
One thing to be clear about up front: Bradford Remodeling Co West Palm Beach is an independent contractor. We are not affiliated with Plant Prefab, and we don’t pretend to be. What we do is know how Plant Prefab homes sit on their lots, how the factory-set elevations interact with driveway grading, and what it takes to correct a paver base that has failed in Florida’s sandy, shifting soil.
Which Plant Prefab Models This Applies To
Plant Prefab homes are set on site by crane, which means the driveway and paver interface is always a site-built condition, not a factory one. The factory doesn’t pour your driveway. That’s the key compatibility fact most owners miss. Whether you have a Plant Prefab LivingHome 1, LivingHome 2, or a custom ADU line, the driveway is designed and installed by the general contractor after the modules are set. So the “OEM” question is really a site-spec question, and matching the right paver means matching what’s already on the ground, not ordering from a Plant Prefab parts catalog.
Here’s the compatibility gotcha we run into regularly in West Palm Beach: the elevation of a Plant Prefab module’s finished floor is fixed by the foundation system, and the driveway grade has to meet that elevation within a narrow tolerance or you get a lip at the garage slab and water running toward the house. If your current pavers are dropping or heaving, we measure the existing paver thickness (typically 60mm or 80mm for driveway-rated pavers, not the 50mm patio-grade), check the base depth, and confirm the finish elevation before quoting one pallet of anything. On the OEM-vs-aftermarket decision: Plant Prefab doesn’t manufacture pavers, so there is no factory part to protect. We install Belgard and Unilock pavers from our documented brand roster, which gives you a manufacturer spec and warranty that sits on top of our own guarantee.
Styles & brands we work with
Signs Your Plant Prefab Driveway & Pavers Is Failing
- Pavers rocking underfoot near the garage apron. This means the bedding sand has washed out or the base has settled. Water migrating under the edge is the usual culprit in West Palm Beach’s flat lots.
- Standing water that sits for more than an hour after rain. Driveways should shed water within minutes. Pooling means the original grade was too flat or the base has settled unevenly, and you’re now getting water pressure against the pavers every storm.
- Sand washing out from between joints after every rain. Polymeric sand fails either from age or because it was never activated properly during install. In humid South Florida conditions, improperly cured polymeric sand can fail within two years instead of ten.
- A visible dip or ridge forming across the driveway width. That’s usually a base failure below the pavers, not a paver problem. Patching the surface without fixing the base means you’ll be back here in eighteen months.
- Efflorescence that won’t go away. White mineral staining that reappears after cleaning signals water is moving through the paver system abnormally, usually from a drainage or base problem rather than a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a full paver driveway installation for a Plant Prefab home runs $7,000 to $18,000. The spread comes down to three things: total square footage, whether we’re excavating and rebuilding the base or salvaging it, and the paver grade you select. A 400-square-foot driveway with a standard Belgard paver on a salvaged base sits at the lower end. An 800-square-foot driveway with a premium Unilock paver and full base rebuild lands at the top.
Here’s the line-item reality we don’t hide:
| Scope | West Palm Beach Price Range |
|---|---|
| Driveway Sealing (existing pavers) | $250 – $700 |
| Partial Paver Repair (spot replacement, base patch) | $1,200 – $4,500 |
| Full Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Alternative | $4,500 – $12,000 |
Every quote is a written, line-item price before work starts. No numbers move at the door. And every completed driveway carries the 365-Day Done Right Promise: if the pavers fail inside a year, we come back and make it right at no charge. That’s in writing, signed, in your hand at close.
DIY or Call Us?
Pavers are not electrical or gas work, and nobody’s going to lose a hand replacing a paver. You can absolutely pull a cracked paver, check what’s underneath, and decide how bad it really is. What you shouldn’t DIY is a base failure. If you’re resetting pavers on top of a failed base, you’re doing cosmetic work that will fail again after the next heavy rain. And if the issue involves the garage slab elevation relative to your Plant Prefab module, you’re dealing with drainage and foundation considerations that a homeowner should not improvise.
The honest split: if it’s one cracked paver in an otherwise stable field, swap it. If you see rocking, pooling, ridges, or sand washing out, call (728) 203-9809 and let us do a proper assessment. We’ll tell you what’s actually wrong before we quote anything.
FAQs
A properly installed paver driveway in West Palm Beach should last 25 to 40 years with periodic joint sand replacement and sealing every three to five years. The pavers themselves rarely fail first. The base and the drainage are what determine lifespan in our sandy, flat, storm-heavy climate.
We can repair isolated sections if the base under the rest of the driveway is stable. The honest answer depends on whether the failure is localized or systemic. Call (728) 203-9809 and we’ll tell you which one you have before we quote a single pallet.
Most full driveway replacements in West Palm Beach take three to five working days from demolition to final compaction and joint sand. Partial repairs are usually one to two days. Weather delays happen, but we tell you the schedule up front and it doesn’t move unless the sky forces it.
We stock common 60mm and 80mm driveway pavers from Belgard and Unilock on our trucks, plus the base materials, edge restraints, and polymeric sand that Plant Prefab driveway repairs require. If your existing paver color or style is discontinued, we’ll match it as close as the current catalogs allow and show you the sample before anything gets installed. Curtis Lane has been running jobs in West Palm Beach for years, and he knows the local soil movement patterns well enough to know when a match is close enough and when it isn’t.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
