Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Kitchen Remodeling: The West Palm Beach Owner’s Guide
A full Boxabl kitchen remodel in West Palm Beach runs $14,000 to $45,000 installed, depending on whether you’re replacing cabinet fronts, reconfiguring the galley layout, or tearing the whole kitchen down to the steel framing. We stock Boxabl-compatible cabinetry, countertops, and fixtures, and we can usually start the tear-out within a week of your written estimate. Most Boxabl owners call us after the factory laminate counters start pulling at the seams or the compact cabinet hinges sag under Florida humidity.
What we see most often in Boxabl units around West Palm Beach is a slow cascade: first the soft-close hardware fails, then the melamine cabinet boxes start swelling where moisture sneaks in, and finally the countertop seams separate along the cooktop cutout. By the time an owner calls, they’re usually deciding between a patch job and a proper rebuild. We’ll give you a straight number for either path before any work starts.
Which Boxabl Models This Applies To
Boxabl builds two kitchen configurations we see regularly here: the Casita layout, which uses a fixed galley with a 24-inch electric range and a 6-foot composite counter run, and the larger ADU kitchenette option that swaps in a 30-inch range and adds a peninsula return. Both use the same OEM cabinet system: 16-inch-deep upper boxes, 24-inch base boxes, and a 5/8-inch substrate under the standard laminate tops. The plumbing rough-in is pex with 1/4-turn valves, and the electrical is a single 20-amp small-appliance circuit plus a dedicated range circuit.
If you’re matching an existing Boxabl cabinet profile, pull the label inside the sink base door. It’ll show a five-digit production code; the first two digits indicate the cabinet line revision, and that tells us whether we’re matching the original flat-door profile or the later shaker-style front. That matters if you only want to replace half the run instead of doing a full remodel. We can match either profile, but the flat-door early-revision cabinets are getting harder to source, so an aftermarket shaker door in a matching finish is often the smarter move.
Boxabl doesn’t sell the cabinet components direct to homeowners, and their drawings are proprietary. We work from field measurements and the same mounting rail spacing Boxabl uses, so the new boxes land on the existing wall cleats without extra framing. Bradford Remodeling Co West Palm Beach is an independent contractor, not a Boxabl affiliate, and every Boxabl kitchen we touch gets documented against the as-built before we order a single door front.
Styles & brands we work with
Signs Your Boxabl Kitchen Remodeling Is Failing
- Cabinet doors dragging or dropping at the hinge. The OEM soft-close hinges Boxabl uses are compact and over-worked. In West Palm Beach humidity, the nylon stops crack and the doors start binding. Tightening the screws buys you a month; replacing the hinge pairs buys you ten years.
- Countertop seams separating around the sink and cooktop. Boxabl’s factory tops are post-formed laminate over particleboard substrate. Once a seam opens, water wicks into the core, the substrate swells, and the surface goes soft. That’s a replacement, not a re-glue.
- Particleboard swelling at the toe kicks or sink base. Even small plumbing drips find their way under the cabinet floor. By the time you see the front edge puffing, the bottom panel has lost its structure. This is the most common failure in Boxabl kitchens aged four years or more.
- Drawer glides sticking after a year or two of salt air. Boxabl’s coastal units get the same glides as inland ones. The steel rollers pit and the slides grind. We swap them for sealed-bearing aftermarket glides and the drawers run quiet.
- Plumbing shut-offs that won’t fully seat. The factory angle stops under the sink are plastic-body valves. They fail closed when you need them most. Our first task on any Boxabl kitchen remodel is replacing those with quarter-turn brass stops.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest West Palm Beach market range for Boxabl kitchen work, including parts and labor:
| Scope | Typical Installed Price |
|---|---|
| Full Boxabl kitchen remodel (cabinets, counters, fixtures, backsplash) | $14,000 – $45,000 |
| Cabinet replacement only (full galley run) | $4,000 – $13,000 |
| Countertop replacement (laminate or quartz, Boxabl-compatible cutout) | $2,000 – $6,500 |
| Kitchen island or peninsula addition (where framing allows) | $3,000 – $10,000 |
| Backsplash install (tile or panel over factory wallboard) | $800 – $2,500 |
What drives the range: whether we keep the existing cabinet boxes or replace them, whether the counter material is laminate or stone, and whether the rough-in plumbing needs to move. Every Boxabl kitchen job gets a written price that includes materials, labor, haul-away of the old components, and a line-item breakdown so you can see exactly what each piece costs. No number changes at the door. The 365-Day Done Right Promise applies to the whole project: if anything fails in the first year, we come back and fix it at no charge.
For Boxabl specifically, the cabinets have to be built to face-mount on the steel wall channels, so we order the boxes at factory depth and width specs rather than trying to make stock big-box cabinets work. That’s one of the reasons our number looks different from a generic cabinet quote: the cabinetry is engineered to this unit, not shimmed into service.
DIY or Call Us?
You can safely handle the small stuff: tightening hinge screws, replacing a damaged drawer glide, re-caulking the sink rim, or swapping a faucet cartridge. Those are straightforward and we’ll even talk you through them on the phone if you want to save the service call.
Where DIY goes wrong on a Boxabl is the cabinet structure and the counter substrate. The cabinets hang on metal cleats attached to the steel frame, and a mis-set bracket or over-torqued screw into the factory channel can pull the cabinet out of square or, worse, strip the attachment point entirely. If the countertop has delaminated, that’s a substrate failure, not a surface issue, and the old top has to come off with the sink and cooktop disconnects done properly. Electrical and plumbing work inside the unit needs a licensed touch, full stop. If you’re looking at swollen toe kicks, failing hinges across the run, or seams opening at the cooktop, call us at (728) 203-9809 and we’ll come measure it before you spend a weekend fighting it.
FAQs
The factory cabinets last five to seven years in our coastal humidity before the hinges, slides, and moisture exposure start showing real wear. The countertops run closer to four or five years if you cook often. Properly sealed replacement cabinetry with sealed-bearing hardware lasts 15 to 20 years in the same conditions. Call (728) 203-9809 if you want us to assess your specific Boxabl’s age and condition.
Yes, if the cabinet boxes are still square and dry. We can rebuild door fronts, swap all the hinge and slide hardware, and re-laminate the counter surfaces without tearing out the whole galley. That usually lands between $4,000 and $13,000 depending on how much of the run needs attention. Fresh hardware and new tops out of the same Boxabl mounting dimensions gives you a like-new kitchen for about a third of a full rebuild.
A full Boxabl kitchen remodel runs 2 to 4 weeks depending on cabinet lead time and whether countertop templates are involved. A cabinet-and-hardware refresh is usually 3 to 5 working days. We’ll put the schedule in the written estimate before you approve anything.
We don’t stock Boxabl OEM cabinet components, because Boxabl doesn’t sell direct. What we do stock is the aftermarket hardware that matches Boxabl’s mounting dimensions: hinges, slides, door bumpers, and the trim profiles used in the factory build. We also keep standard 16×24 and 24×24 cabinet boxes in flat and shaker profiles that drop onto the existing cleats. We source from the same supply lines we use for KraftMaid, Cambria, and Silestone jobs, so the materials are documented and warrantied. Call (728) 203-9809 and we’ll tell you what we have and what we need to order.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
