Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The West Palm Beach Owner’s Guide
If you own a Mighty Buildings home in West Palm Beach and your driveway or paver surface is cracking, sinking, or separating, here’s the straight answer: we stock and install Mighty Buildings-compatible paver and driveway materials, and a full paver driveway installation in this market typically runs $7,000 – $18,000 depending on square footage, substrate condition, and paver grade. Most West Palm Beach owners discover the failure after a heavy rainy season, when water intrusion through hairline cracks erodes the sand base and the pavers start shifting. You’ll see it first as a low spot near the curb or a section that rocks underfoot.
We’re an independent contractor, not affiliated with Mighty Buildings. We know their panel systems and site-prep standards because we’ve worked around them in this climate. That matters when matching a driveway surface to the home’s existing drainage plan.
Which Mighty Buildings Models This Applies To
Mighty Buildings homes in Florida are built on elevated slab or pier foundations with specific load ratings, and the driveway approach is typically spec’d as permeable pavers, concrete pavers, or poured concrete with paver borders. The compatibility question isn’t about a specific Mighty Buildings “model number” on the driveway itself. It’s about the site plan and the existing substrate. What you need to match is the paver thickness, the base depth, and the drainage slope.
Most Mighty Buildings driveways in West Palm Beach use 60mm or 80mm concrete pavers over a 4 – 6 inch compacted base. Some use 2 3/8-inch thick units. If your original pavers are 60mm and someone drops in 80mm replacements, you’ll end up with a lip at every transition. Here’s the gotcha: Mighty Buildings’ factory site plans often call for a specific paver profile to maintain positive drainage away from the panel walls. Swap in a thicker or thinner unit without re-grading, and water starts pooling against the structure. That’s where we start every Mighty Buildings driveway job: verifying the original grade before touching a single paver.
For the OEM-versus-aftermarket decision: Mighty Buildings doesn’t manufacture pavers. The original installers used commodity hardscape products, typically from Belgard, Unilock, or Tremron, which is the dominant Florida paver manufacturer. We stock Tremron and Belgard units in common West Palm Beach colorways because they’re locally available and match what’s already in the ground. If your pavers are discontinued, we match by physical sample, not by catalog name.
Styles & brands we work with
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. This means the bedding sand has washed out, usually from water flowing through a cracked paver or a failed edge restraint. It only gets worse because every rain event moves more sand.
- Low spots that hold water after rain. A settled base is the cause, almost always from organic material decomposing underneath or from a base that was never compacted to spec. In West Palm Beach, standing water also brings mosquitoes, so it’s not just a looks problem.
- Hairline cracks running across multiple pavers in a line. That’s a base failure, not a paver failure. It means the load-bearing layer underneath has cracked or settled unevenly. Replacing just the cracked pavers won’t fix it.
- Weeds or grass growing through the joints. The joint sand has depleted and the paver field has opened up enough for roots to take hold. Left unchecked, roots lift pavers and accelerate base erosion.
- The edge row is spreading outward. When the plastic or metal edge restraint fails, the entire paver field starts migrating outward under vehicle load. You’ll see the gap first along the driveway’s outer edges.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a full paver driveway installation runs $7,000 – $18,000. A paver patio, which Mighty Buildings homes often have adjacent to the driveway, runs $3,500 – $11,000. A concrete driveway replacement runs $4,500 – $12,000. Driveway sealing runs $250 – $700. Those are installed numbers: materials, labor, base prep, haul-away of the old surface, and a written warranty.
What drives the range is square footage first, then paver grade, then how much base reconstruction the existing grade requires. If the substrate is intact and we’re doing a re-sand, re-level, and edge-repair, you’re on the low end. If the base was never properly compacted and has to be excavated and rebuilt, the price climbs. Every bid from Bradford Remodeling includes a line-item breakdown and a written price before work starts. That number doesn’t move at the door. The 365-Day Done Right Promise covers the paver work and base repairs for a full year. If it fails inside that window, we return and correct it at no charge.
DIY or Call Us?
Here’s where you can save money safely: if a single paver has cracked and you have the matching unit, you can pry it out, reset it on fresh sand, and sweep polymeric sand into the joints. That’s honest weekend work. What you should not attempt is re-grading a settled base, replacing an edge restraint, or re-laying a section that has shifted more than a few inches. Those jobs require compacting equipment, a laser level, and a drainage plan that accounts for how Mighty Buildings panel walls shed water. A paver is not dangerous the way a garage spring is. But a half-ton of pavers laid over a bad base is a failed project waiting to be paid for twice. If you’re seeing multiple symptoms from the list above, call (728) 203-9809 and we’ll walk the driveway with you.
FAQs
A properly installed paver driveway with a compacted base should last 20 – 30 years in West Palm Beach, but the base itself is the real lifespan. The pavers will outlast the base in most cases. The Florida rain cycle and sandy soil are hard on bases that were never compacted to spec, which is why most driveways fail in the first five to seven years, not in year twenty. Call (728) 203-9809 and we’ll tell you whether your base is the problem or if you’re just looking at cosmetic paver wear.
Yes, if the failure is isolated to a section, the base under that section is still sound, and the rest of the paver field is stable. A section repair on a Mighty Buildings driveway in West Palm Beach typically costs less than half of a full replacement. If the base has failed across multiple sections, repairing piecemeal just means you’ll pay for the base work twice. Call (728) 203-9809 for an honest read on your driveway.
Most full driveway replacements in West Palm Beach take 3 – 5 working days, including demolition, base prep, paver installation, joint sanding, and final compaction. If the base requires deeper excavation and rebuild, add a day or two. We give you a written scope with the timeline before anyone shows up, and Curtis Lane will call you before the crew touches anything that wasn’t in the original scope.
We stock common Tremron and Belgard paver profiles in sizes that match most Mighty Buildings site specs in West Palm Beach, along with matching edge restraints and joint sand. If your exact color or profile is discontinued, we source and match by physical sample from our local supplier network. We also maintain relationships with suppliers for KraftMaid, Cambria, and Silestone when a project crosses over into other finishes, but driveway work stays focused on hardscape materials. If you call (728) 203-9809 with a paver in hand, we’ll tell you within a day whether we can match it.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
