Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The West Palm Beach Owner’s Guide
A Barrette kitchen remodel in West Palm Beach typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop material, and whether we’re moving plumbing or electrical. We stock and install Barrette-compatible components alongside our documented brands, and we can usually start a full remodel within two to three weeks of the written estimate. Most homeowners call us because a Barrette cabinet door has delaminated in the humidity, a drawer glide has snapped, or the laminate edge banding has peeled away from the substrate and they want to know if they’re looking at a repair or a replacement.
Which Barrette Models This Applies To
Barrette produces cabinet lines through several series that show up in Florida kitchens: the Barrette Outdoor Living division covers deck and railing systems, while the cabinet lines (often sold through regional suppliers and big-box retailers) include frameless and face-frame configurations in both stock and semi-custom depths. The gotcha with Barrette cabinets in West Palm Beach is the door hinge boring pattern: some older Barrette lines use a 35mm cup hinge, but certain semi-custom runs came through with a 26mm offset that won’t accept a standard European hinge swap. Before you order anything, pull one hinge off and measure the cup diameter with a caliper. If the door is thermofoil-wrapped MDF and has been in a humid Florida kitchen for more than eight years, the wrap is likely the failure point, not the hinge.
For OEM versus aftermarket: Barrette OEM drawer glides are fine parts, but we routinely install Blum or Salice aftermarket glides when the original side-mounts have wallowed out their screw holes. The aftermarket units run about $18 – $35 per pair and hold up better in coastal humidity. We’re an independent contractor, not affiliated with Barrette, so we spec the part that actually solves the problem, not the one with the matching logo. Bradford Remodeling Co West Palm Beach also stocks parts for KraftMaid, Cambria, and Silestone lines, so if your kitchen is a mix, we can handle the whole scope in one visit.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
- Laminate edge banding lifting at the seams. This is the classic South Florida failure. The heat and humidity in West Palm Beach cause the adhesive behind the banding to release, especially on dishwasher-adjacent cabinets. Once water gets behind the banding, the MDF core swells and the door is usually gone.
- Drawer glides that grind or stick on one side. Side-mount glides lose their ball bearings over time, or the cabinet box itself has shifted out of square. If the drawer is sagging but the glide looks intact, check the box with a level before you replace parts; you may be chasing a structural issue instead of hardware.
- Hinges that won’t hold adjustment. If you tighten the screw and the door drops again within a week, the hinge plate has stripped its bore in the cabinet side panel. That’s a common Barrette repair where we epoxy-fill and re-bore, then install a fresh plate.
- Thermofoil doors bubbling or peeling. Heat from a nearby oven vent or a south-facing window accelerates this. The thermofoil separates from the MDF core and there’s no reliable glue fix; the door gets replaced or painted, depending on the Line.
- Frameless cabinet boxes racking out of square. Barrette frameless boxes depend on a solid back panel for rigidity. If the back panel was never glued (just stapled) or has gotten wet, the whole box twists. You’ll see doors that no longer line up no matter how much you adjust the hinges.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the straight number set for West Palm Beach, calibrated to what we see on actual local jobs:
- Full kitchen remodel (Barrette cabinets, countertops, backsplash, fixtures): $14,000 – $45,000
- Cabinet installation only (Barrette or aftermarket boxes and doors): $4,000 – $13,000
- Countertop installation (Cambria or Silestone quartz, or Caesarstone): $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
Every one of those numbers is a written price before the first tool leaves the truck. What drives the range: whether we’re keeping the existing footprint or moving plumbing, whether the cabinets are stock-depth or semi-custom, and what’s behind the old backsplash once we demo (in older West Palm Beach homes, it’s often plaster over lath, which needs a different prep than drywall). The written estimate breaks out parts and labor separately, and the 365-Day Done Right Promise covers our workmanship for a full year. If a drawer glide fails or a door goes out of square inside that window, we come back and fix it at no charge.
DIY or Call Us?
Some of this work is genuinely owner-level. Adjusting a hinge, swapping a drawer glide, or replacing a cabinet pull takes a screwdriver and maybe a drill; if the part is simply worn and the box is square, you can handle it in an afternoon. But cabinet work in Florida goes sideways fast when the substrate is compromised. If the back panel is water-damaged, the box is racked, or the hinge bores are stripped, you’re not fixing hardware anymore, you’re rebuilding. And if you’re dealing with anything that involves modifying the cabinet structure around a gas line or electrical rough-in, that’s a stop-and-call situation. We’ve walked into enough garages where a homeowner’s “quick drawer fix” turned into a trip to the urgent care with a sliced hand from a broken glide rail. Cabinet work is generally not high-tension dangerous the way garage springs are, but torn sheet metal edges and splintered MDF will cut you before you know it. If you’re unsure, call (728) 203-9809 and we’ll tell you over the phone whether it’s a you-job or a us-job. The advice is free.
FAQs
A well-installed Barrette cabinet run typically holds up for 15 – 20 years in West Palm Beach before you start seeing real failures like banding release or box racking, but that lifespan drops to under 10 years if the cabinets were installed without attention to the humidity or the back panels were never properly sealed. Our installs hold up longer because we glue and fasten the back panels, not just staple them, and we spec full-height end panels that resist twisting. Call (728) 203-9809 for a site assessment and we’ll tell you honestly how much life your current boxes have left.
Yes, depending on what failed. Hinges, glides, and edge banding are repairable; delaminated thermofoil doors and water-swollen MDF panels are not. The repair-versus-replace call hinges on the substrate. If the core is solid, we repair at the parts-and-labor rate for that specific component, and the 365-Day Done Right Promise covers the fix.
A cabinet-and-countertop swap without plumbing changes takes 2 – 4 weeks from demo to final walkthrough. A full remodel with plumbing moves, electrical rough-in, and custom island work runs 6 – 10 weeks. We put the schedule in the written estimate, and if something in the field changes the timeline, Curtis Lane calls you before he touches it, not after. Call (728) 203-9809 for a free estimate and we’ll give you a real date range, not a vague “soon.”
We stock common Barrette-compatible components on our trucks: hinge plates, cup hinges in both 35mm and 26mm bores, side-mount and undermount glides, edge banding, and cabinet pulls. Specialty sizes or older Barrette series parts may take 3 – 5 business days to source, and we’ll tell you the lead time in the written estimate before you sign anything. Straight number, full scope, no surprises after the invoice.
Ready to get your Barrette kitchen back to square? Call (728) 203-9809 and we’ll send a background-checked, uniformed technician to your West Palm Beach home, put a written price in your hand, and stand behind the work for a full year. That’s The Garrison Standard, and it’s non-negotiable.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
