Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The West Palm Beach Owner’s Guide
If you have a Mr-Glass paver driveway, walkway, or pool deck that’s showing its age, we stock replacement pavers and hardscape materials matched to the Mr-Glass product line, and we install them across West Palm Beach. An installed paver repair or section replacement in West Palm Beach typically runs $700 – $4,500 depending on square footage, base condition, and access. That’s a straight number: parts, labor, and haul-off, written down before we start. Most owners discover the problem the way you just did. A paver cracked, a section settled after one of our summer downpours, or the sand joints washed out and now every step grinds. You’re not looking for a whole new driveway unless the base failed. You’re looking for the right part, matched, and put back in right.
Key Takeaways
- Mr-Glass pavers are a specific product line: matching the profile, color lot, and thickness matters more than brand loyalty on a repair.
- West Palm Beach paver failures are rarely the paver itself. It’s usually the base, the edge restraint, or the polymeric sand.
- We stock common Mr-Glass-compatible profiles on the truck and can order exact color lots from our supplier network.
- Every repair gets a written price before work starts and the 365-Day Done Right Promise after.
Which Mr-Glass Models This Applies To
Mr-Glass paver lines vary by profile, not by a stamped model number like you’d find on an appliance. What you’re matching is the paver shape, thickness, and finish. The most common profiles we see in West Palm Beach are the Holland stone (rectangular, often used for driveways), the square modular paver, and a tumbled paver used on pool decks and patios. Three things identify what you have: the pattern (running bond, herringbone, or basket weave), the paver dimension (most driveways use a 60mm or 80mm paver; patios and walkways often 50mm), and the surface finish (smooth, tumbled, or textured). Pull one paver and measure it. If you can’t tell us the thickness, we come out and measure it ourselves during the estimate.
On the OEM versus aftermarket question: Mr-Glass pavers from a big-box store and a quality aftermarket profile from a manufacturer like Belgard or Unilock can look nearly identical. What matters is the color lot. The same paver in “sand” can shift noticeably between production runs. If we’re doing a patch, we order from the same supplier with the same lot code when possible. If we’re doing a full replacement, the whole surface gets done in one lot so you don’t get a patchwork. Bradford Remodeling Co West Palm Beach is an independent contractor. We’re not affiliated with Mr-Glass or any retailer carrying their line. We match the product, we price the work, and we warrant what we install.
Styles & brands we work with
Signs Your Mr-Glass Driveway & Pavers Is Failing
- One paver cracked while the rest are fine. That’s usually point pressure: a car turning with a heavy load, a tree root pushing up from below, or a dropped tool. The fix is a single-paver swap and a base patch, not a full drive.
- A section sank below the rest. A low spot means the base washed out underneath. West Palm Beach rain moves fine sand faster than most people expect. The paver is fine, but the base needs recompaction.
- Sand washes out of the joints after every rain. Old polymeric sand breaks down after about 8 – 10 years in South Florida sun and rain. When the joints go, pavers shift, then crack.
- Edges are spreading outward. That’s a failed edge restraint. The driveway looks like it’s slowly widening. Without the plastic or concrete edge holding the border, the whole field drifts.
- White residue on the surface. That’s efflorescence, and in West Palm Beach’s humidity it’s common with concrete pavers. It’s cosmetic, not structural, but it tells you the pavers are breathing moisture through their pores and the sealer is gone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Mr-Glass paver repair or section replacement in West Palm Beach, here’s what we quote:
| Job Scope | Installed Price Range |
|---|---|
| Single paver replacement (10 – 20 sq ft) | $150 – $500 |
| Section repair (50 – 100 sq ft, base patch included) | $700 – $2,000 |
| Full paver driveway replacement (2-car, base rebuild) | $7,000 – $18,000 |
| Full paver driveway replacement with existing base | $5,000 – $11,000 |
| Polymeric sand reapplication & joint restoration | $400 – $1,200 |
| Edge restraint replacement (per driveway) | $500 – $1,500 |
What drives the range is square footage, how much base needs excavation and recompaction, and whether we’re hauling off old material. Parts and labor are one line item on our written quote. No separate “materials fee” appears later. The work is covered by our 365-Day Done Right Promise: if the repair fails inside a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely lift a paver, check the sand underneath, and sweep new joint sand into the surface. That’s honest homeowner work. What you shouldn’t do is try to reset a section that’s sunk more than an inch. You’ll be digging out a base you can’t recompact correctly by hand. The most common DIY failure we see in West Palm Beach is a patch job that looks fine for six months, then settles again. The second attempt always costs more because now we’re digging out someone else’s partial fix along with the original base. If the paver is loose, lift and reset it. If the base is gone, call us at (728) 203-9809. Curtis Lane will tell you the same thing on a job walk: a paver is cheap. The base is the project.
FAQs
How long do Mr-Glass pavers last in West Palm Beach?
20 to 25 years for the pavers themselves if the base was done correctly and the joints are maintained. The polymeric sand will need reapplication every 8 – 10 years in our humidity and rain. If you’re seeing failure at year 5, it’s almost always a base problem, not a paver problem.
Can you repair my Mr-Glass driveway instead of replacing it?
Yes, and most of the time repair is the right call. We reset sections, recompact the base, replace edge restraints, and re-sand joints. Full replacement only makes sense when the base has failed across most of the driveway or the pavers are so aged the color lots are no longer available. Call (728) 203-9809 for an honest read, not a sales pitch.
How long does the paver swap take?
A single-paver replacement or small section repair takes one day, including base patch and joint sand. A full driveway replacement with base rebuild runs 3 – 5 days for a standard two-car driveway in West Palm Beach, assuming clear access and no rain delays.
Do you stock Mr-Glass pavers on the truck?
We stock common Holland and square profiles in the most-used West Palm Beach colors, along with joint sand and edge restraint materials. If your color lot is specific, we order it through our supplier network and confirm the lead time before we schedule. We also carry matching profiles from Belgard and Unilock, along with parts support for KraftMaid, Cambria, and Silestone if you’re doing hardscape and interior work at the same time.
Call (728) 203-9809 for a free estimate. Straight number, full scope, no surprises after the invoice.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
