Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The West Palm Beach Owner’s Guide
PGT fence installation in West Palm Beach typically runs $3,500 to $9,000 installed, depending on linear footage, fence style, and whether the existing posts can be reused. We stock PGT-compatible fence panels, posts, gates, and hardware on our trucks, and we match the part to your specific product line before we ever quote a number. Most owners discover an issue the same way: a post leans after a storm, a gate drags across the pavers, or a panel starts rattling in the afternoon wind coming off the Intracoastal.
PGT is better known in Florida for impact windows and doors, but their fence line shows up on plenty of West Palm Beach properties, often paired with a patio screen enclosure or a coastal-style aluminum perimeter. The failure pattern we see most often is not the PGT extrusion itself. It’s the installation underneath it: shallow post embedment, the wrong fastener for salt-air exposure, or a gate hinge that was never re-tensioned after the concrete settled. Curtis Lane has walked enough of these job sites along the Northwood Village corridor to know exactly where the weak points are before the first screw comes out.
Which PGT Models This Applies To
PGT fence systems fall into a few recognizable lines, and the part you need depends on which one is already in your yard. The most common in West Palm Beach are the aluminum panel systems with a powder-coated finish, usually built around 2-inch square posts with a channeled top and bottom rail that captures the pickets. You’ll also see PGT’s privacy screen panels around pool enclosures and some vinyl-composite lines. These are not interchangeable. An aluminum panel does not drop into a vinyl post channel, and the gate hardware for a 4-foot walk gate is not the same weight class as a 6-foot drive gate.
Here’s the compatibility gotcha we run into constantly: PGT panel widths are not universal across their lines. Some systems use 6-foot-wide panels, others use 4-foot or 5-foot sections. Pull a tape measure across the panel face before you order anything. If your panel is 72 inches wide and you buy a 60-inch replacement, you’ll be cutting rails and drilling new picket holes on site, and that changes the price. The second gotcha is coastal hardware. Within a mile of the salt water, standard zinc hardware corrodes in three to five years. We specify stainless or powder-coated aluminum fasteners for any West Palm Beach fence that sits in the salt-air zone, which is most of the neighborhoods east of I-95.
OEM PGT parts carry the manufacturer’s finish warranty and guaranteed dimensional match. Quality aftermarket aluminum extrusions from Florida-based suppliers are often identical in gauge and coating chemistry, and they cost 20 to 30 percent less. We’ll install either, but we’ll tell you which one makes sense for your fence and why before you spend a dollar. Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with PGT, and we’re direct about that. We install and service their fence products because we know the lines, not because of a factory relationship.
Styles & brands we work with
Signs Your PGT Fence Installation Is Failing
- Leaning post with no visible impact damage. The post was either set too shallow for Florida’s sandy soil or the concrete footer has cracked below grade. In West Palm Beach’s wet season, saturated ground loosens footers that were poured under minimum depth, and the post starts drifting a degree or two at a time.
- Gate drags or won’t latch. Gate posts take the most load on any fence. When the hinges sag, the latch alignment shifts, and the gate starts catching on the pavers or swinging past the strike. It’s almost never the PGT gate panel itself. It’s the post shifting and the hinge hardware loosening.
- Panel rattles in the wind. The channel screws that hold the panel to the post have backed out or the rubber isolators have disintegrated in UV exposure. Florida sun eats rubber and nylon components faster than manufacturers admit. If the panel moves more than a quarter inch when you push on it, something in the connection is gone.
- White chalky residue on the aluminum. That’s oxidation, not dirt. It happens when the powder coating is compromised, usually at a cut edge or a scratch from a line trimmer. Left alone in salt air, the aluminum underneath pits, and the panel’s structural life shortens.
- Green or black staining at the post base. Sprinkler head overspray hitting the same post twice a day will corrode aluminum and stain the finish. We see it on nearly every fenced yard in West Palm Beach that runs irrigation along the perimeter. The fix is often a rerouted sprinkler head and a post base coating, not a full replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed PGT fence work in West Palm Beach runs $3,500 to $9,000 for a typical residential project. That range covers replacement of 50 to 150 linear feet of aluminum panel, including new posts where needed, new hardware, and a walk gate. Here’s the line-item breakdown so you can see where the number comes from:
- Aluminum panel material: $45 to $90 per linear foot, depending on panel height (4, 5, or 6 foot) and finish grade
- Post replacement: $85 to $150 per post, including concrete footer and set time
- Gate (walk gate, 4-foot): $450 to $1,100 including frame, hinges, and latch assembly
- Gate (drive gate, 10-foot, single swing): $1,800 to $3,500 including steel post reinforcement
- Labor (removal, haul-off, install): $1,200 to $2,800 depending on access and existing footer condition
- Permit and inspection (if required by local code): $150 to $400 when the project triggers permit thresholds in West Palm Beach
Every quote from Bradford Remodeling Co West Palm Beach starts with a written price before work begins. That written price includes the parts, the labor, the haul-off of old material, and the permit if one is required. If we find rotted footer concrete or a buried sprinkler line in the way, we call you before we touch it. The number does not move at the door. And when we finish, the fence is covered by the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge. Straight number, full scope, no surprises after the invoice.
DIY or Call Us?
A homeowner with a drill and a level can tighten loose channel screws, replace a latch strike, and lubricate gate hinges. Those are maintenance items, not fence installation, and you should do them. What we recommend you do not touch is post removal, footer work, or gate post replacement. A gate post set in concrete carries real dynamic load every time the gate swings. If the embedment is too shallow or the concrete is under-cured, the post will lean again in six months, and now you’ve paid twice. Aluminum panel cutting also goes wrong quickly: the blade binds, the cut edge burrs, and the powder coating chips along the cut line. That exposed aluminum starts oxidizing immediately in Florida humidity.
If your PGT fence is leaning, rattling, or dragging in West Palm Beach, call (728) 203-9809. We’ll measure the panels, check the footers, and give you a written number for the fix. No pressure, no vague language, no surprise line items.
FAQs
A properly installed PGT aluminum fence with powder-coated finish and stainless hardware lasts 20 to 25 years in West Palm Beach, but only with post embedment at code depth and hardware rated for salt air. Poor installation cuts that to under 10 years. Call (728) 203-9809 for an assessment of your specific fence.
Yes, in most cases. Loose panels, sagging gates, and failed hardware can be repaired without pulling the entire run. We replace full panels only when the aluminum is pitted, the coating is failed across the panel face, or the extrusion is bent beyond straightening.
A typical panel and hardware replacement is a one-day job. Post replacement with new concrete footers runs two to three days, because the footer needs 24 to 48 hours to cure before the panel loads go back on. We tell you the timeline in the written quote before we start.
We stock common PGT-compatible fence hardware, panel channels, gate hinges, and latch assemblies on our trucks, along with parts for KraftMaid cabinetry, Cambria and Silestone surfaces, and the other brands we service. Full panels are ordered to your measured width and finish. Estimate appointment for your fence is free.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
