Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The West Palm Beach Owner’s Guide
A PGT bathroom remodel in West Palm Beach typically runs $9,000 to $28,000 installed, depending on the scope of the shower system, glass enclosure, and surrounding waterproofing work. We stock PGT-compatible shower doors, hinges, seals, and track hardware on the truck, and we can usually swap failed components the same week you call. Most homeowners discover the problem the hard way: a shower door that suddenly won’t seal, a track that’s pulling free from the wall, or water staining the ceiling below a second-floor bathroom.
PGT builds its name on impact-rated windows and doors in Florida. But the bathroom lines, particularly the shower enclosures and hinged glass panels, live a hard life in West Palm Beach humidity, hard water, and salt air. Seals degrade, stainless hardware corrodes faster here than it does in drier markets, and framing can shift as slab foundations settle. When a PGT bathroom component fails, the fix is rarely “just the part.” The substrate behind it usually needs attention too.
Which PGT Models This Applies To
PGT’s bathroom product line covers framed and semi-frameless shower enclosures, hinged shower doors, sliding bypass doors, and the associated hardware: pivot hinges, roller assemblies, side seals, bottom sweeps, and header tracks. The compatibility gotcha is the glass thickness and hinge pattern. Older PGT shower enclosures in West Palm Beach homes built in the 1990s and early 2000s typically use 3/16-inch glass with notched-edge pivot hinges. Newer units run 5/16-inch or 3/8-inch tempered glass with drilled hinge inserts. Mixing those two systems is a common mistake: a 3/16-inch door will not seat properly in a 3/8-inch track, and forcing it cracks the glass.
You can identify your model by looking for the PGT etching in the lower corner of the glass, which gives the manufacturing code and often the series designation. The hinge hardware also tells the story. Notched-edge brackets mean an older hinge system. Drilled inserts mean newer. If the etching is missing or painted over, measure the glass thickness with a caliper: 0.1875 inches is 3/16, 0.3125 is 5/16, and 0.375 is 3/8. We stock OEM PGT hardware and quality aftermarket equivalents for both patterns. For a product line that’s been discontinued, aftermarket is usually the only option, and we’ll tell you that before we order anything.
Bradford Remodeling Co West Palm Beach is an independent service provider. We are not affiliated with PGT, and we don’t claim to be. What we bring is hands-on knowledge of how these enclosures fail in South Florida conditions, and a written price before any work starts.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Water pooling at the base of the shower door. The bottom sweep or side seal has hardened and lost its flex. In West Palm Beach’s humidity, rubber seals can stiffen in as little as three to five years. Water escapes, and the floor outside the shower stays wet.
- The door drags or scrapes the curb. The pivot hinge has worn, or the door has settled out of square. Forcing it open and closed accelerates the wear and eventually cracks the glass at the hinge point.
- Corrosion blooming on the hinge or handle. Salt air near the coast and hard water throughout Palm Beach County attack electroplated hardware. Once the plating fails, the base metal pits, and the hinge gets stiff or the handle snaps off.
- The header track is pulling away from the wall. The wall anchors have rotted or the drywall behind the track got wet and lost its grip. This is a substrate problem, not a hardware problem, and tightening the screws won’t fix it.
- You hear a creak or snap when the door moves. That’s metal fatigue in the hinge or roller. It fails eventually, and when it does, the door can drop suddenly. Tempered glass shatters into small pieces, but a falling glass panel is dangerous.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a full PGT bathroom remodel with a new shower enclosure, waterproofing, tile work, and fixtures lands between $9,000 and $28,000. That range is driven by the size of the shower footprint, whether you’re replacing a tub with a walk-in shower, the glass thickness and hardware finish, and the condition of the wall substrate once we open it up. A straight hardware and seal replacement on an existing enclosure runs lower, often $800 to $3,000 depending on the parts.
Here’s the line-item breakdown for a typical mid-range PGT bathroom remodel:
- Demolition and haul-away of the existing shower or tub: $800 – $2,000
- Waterproofing, substrate repair, and floor leveling: $1,500 – $4,000
- New PGT or PGT-compatible shower enclosure, installed: $2,000 – $6,000
- Tile, grout, and setting materials: $1,500 – $5,000
- Plumbing rough-in and fixture installation: $1,500 – $5,000
- Finishing work, trim, and site cleanup: $800 – $2,500
Every line is written down before we start. That’s The Garrison Standard: no numbers that move at the door, no change orders you didn’t approve in writing. If we find water damage inside the wall, we call you, we show you, and we give you a written price for the additional work before we touch it. The work itself is covered by our 365-Day Done Right Promise. If it fails inside that window, we return and correct it at no charge.
DIY or Call Us?
There are things you can safely check yourself: door alignment, visible seal wear, corrosion on the hardware, and water staining on the curb. That’s inspection, not repair. The repair side is where bathroom remodeling gets dangerous in West Palm Beach. Tempered glass under tension, wall cavities with hidden water damage, and substrates that may be soaking wet behind the tile are not weekend projects. A hinge replacement looks simple until you realize the glass weighs 60 pounds and the anchor points are rotted.
If the seal is worn you can sometimes buy time with a replacement sweep from a hardware store, if you can match the profile exactly. But once the track is loose, the hinge is creaking, or water has been escaping for months, the fix belongs to someone who does this every week. Call us at (728) 203-9809 and we’ll give you a straight number, full scope, and no surprises after the invoice.
FAQs
A properly waterproofed PGT bathroom remodel in West Palm Beach should last 15 to 20 years on the structural work, with seals and hardware needing replacement every 5 to 8 years due to humidity and hard water. The tile and glass will hold; the moving and flexible parts wear first. Call (728) 203-9809 if your seals are aging and you want an exact assessment.
Yes, if the glass is intact and the substrate is sound, we can replace hinges, seals, tracks, and handles without pulling the whole enclosure. If the wall behind the track or curb has water damage, the repair becomes a partial remodel. We’ll tell you which one you have before we quote anything.
Hardware and seal replacement on an existing PGT enclosure takes one day. A full PGT bathroom remodel takes 2 to 4 weeks depending on tile choice, plumbing changes, and the condition of the substrate once demolition uncovers it. We give you a schedule in writing at the start.
We stock the most common PGT-compatible replacement parts: bottom sweeps, side seals, pivot hinges, roller assemblies, and handle sets in the standard finishes. Special-order glass or uncommon hardware takes 1 to 2 weeks. We’ll tell you the lead time before you commit to anything.
Call (728) 203-9809 for a free estimate on your PGT bathroom remodel. A real person answers, 24/7, and you’ll get a written price before any work begins.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
