Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The West Palm Beach Owner’s Guide
A full Boral bathroom remodel in West Palm Beach typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a single shower or gutting the room to the studs. We stock Boral-compatible trim, panels, and substrate materials, and most tear-out work starts within a week of your written estimate. Most homeowners call us after noticing cracked grout lines, a shower pan that won’t drain, or water staining on the ceiling below a second-floor bathroom. Boral’s solid-surface and stone-composite products hold up well, but Florida humidity and hard water are harder on the install than on the material itself. When the substrate fails, the Boral surface fails right along with it.
Key Takeaways
- Installed Boral bathroom remodels in West Palm Beach run $9,000 – $28,000
- Most Boral failures trace back to substrate and waterproofing, not the surface panel
- Every job gets a written price and the 365-Day Done Right Promise
- We’re an independent contractor, not affiliated with Boral
Which Boral Models This Applies To
We work with Boral’s bathroom-adjacent product lines most common in Florida builds: the solid-surface panel systems used in shower surrounds and tub decks, plus Boral’s composite trim and moisture-resistant backer products that sit behind tile and stone. The compatibility gotcha most owners run into: Boral panels from the pre-2018 production runs have a slightly different tongue-and-groove profile than current stock, so you can’t always piece-meal a repair with a single new panel. We verify measurements before ordering. If your original install is older than six or seven years, we’ll check the edge profile and thickness before quoting materials so there are no surprises at the rough-in stage.
For the question of OEM versus aftermarket: Boral’s own panels carry manufacturer specs and warranty language we can cite in your project file. Quality aftermarket equivalents exist for some trim profiles and backer boards, and we’ll give you both numbers in writing. The decision usually comes down to whether you want the Boral warranty intact on a young install or you’re fine with an equivalent on a ten-year-old shower that’s being rebuilt anyway.
Styles & brands we work with
Signs Your Boral Bathroom Remodeling Is Failing
- Grout lines cracking at the corners and along the pan line. This tells us the substrate is flexing. Boral panels don’t flex; what’s behind them does. Caulk will buy you weeks, not years.
- Water staining on the ceiling below the bathroom. By the time you see this, the waterproofing layer has already let go. The Boral surface may still look fine. The failure is underneath it.
- Soft spots in the shower floor or around the drain. The mud bed or the membrane beneath the Boral pan has degraded. Standing water accelerates this in West Palm Beach’s humidity.
- Musty smell that doesn’t clear after cleaning. Trapped moisture in wall cavities is feeding organic growth behind the panels. Dehumidifiers treat the symptom, not the failing waterproofing.
- Loose or lifting panel edges where the Boral meets the tile. The adhesive bond or the mechanical fastening has given up. This is the easiest problem to catch before it becomes a full gut.
Replacement Cost & What’s Included
In West Palm Beach, a Boral shower surround replacement lands between $9,000 and $18,000 for a standard 60-inch alcove. A full bathroom remodel including the Boral surround, new waterproofing, tile, fixtures, and vanity runs $18,000 to $28,000. The spread comes down to three things: whether we’re tearing out tile to reach the substrate, whether the rot extends into framing, and what finish materials you choose on top of the Boral. We give you a written price before any work starts, with parts and labor separated so you see exactly where the money goes. No numbers move at the door.
| Scope | Installed Price Range |
|---|---|
| Boral shower surround replacement (60″ alcove) | $9,000 – $18,000 |
| Full bathroom remodel with Boral surround | $18,000 – $28,000 |
| Walk-in shower conversion with Boral panels | $4,500 – $12,000 |
The 365-Day Done Right Promise covers the entire installation for a full year. If the work fails inside that window, we come back and correct it at no charge. That’s in writing, on the estimate and on the final documents you sign.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things before calling: look for visible grout cracks, test the shower floor for softness, and run the water to see if the drain is slow. What you should not do is pull a panel off to see what’s behind it. That panel is part of your waterproofing envelope. Once you break that seal, you’ve turned a contained repair into an open leak. Rebuilding a Boral shower correctly means pulling the substrate, inspecting the framing for rot, and reinstalling a proper waterproof membrane before the new panels go in. That’s not a weekend project, and the consequence of getting it wrong is structural damage you won’t see until it’s expensive.
If you’re in West Palm Beach and you see any of the failure signs above, call (728) 203-9809 and we’ll walk through what you’re seeing. Estimate is free, and nobody pressures you into a job you don’t need yet.
FAQs
In West Palm Beach’s climate, a properly installed Boral surround should last 15 to 20 years before surface wear or substrate issues force a replacement. The limiting factor is almost never the panel itself; it’s the waterproofing membrane and the quality of the original substrate work. Call (728) 203-9809 if you’re seeing grout cracks or soft spots and want an honest assessment.
A hairline surface crack can sometimes be filled with a color-matched compound, but any crack that penetrates through the panel means the waterproofing is compromised and the panel needs replacement. In West Palm Beach, where humidity pushes moisture into every gap, a patched penetration is a slower version of the same failure. Call (728) 203-9809 for a written quote on a proper replacement.
A typical Boral shower surround replacement takes 5 to 7 working days from tear-out to finished grout. A full bathroom remodel with Boral panels, new tile, and fixture work runs 2 to 3 weeks depending on scope and any framing repairs. We give you a schedule in writing before we start, and we call you if the schedule changes.
We stock Boral-compatible backer board and trim profiles on our trucks, but full Boral panels are ordered per job to match your existing thickness and edge profile. We also work with KraftMaid and Cambria vanities and Silestone surfaces for the surrounding finishes, so the whole room can be specced in one written estimate. Call (728) 203-9809 to confirm the right panel before you order anything yourself.
Get a Written Estimate for Your Boral Remodel
If you own a Boral bathroom in West Palm Beach and the signs are telling you something’s off, don’t wait for the ceiling stain. Call (728) 203-9809 for a free estimate. Curtis Lane and our crew will assess what’s actually failing, give you a straight number, and put the full scope in writing before a single tool comes out. Straight number, full scope, no surprises after the invoice.
Written by Curtis Lane, Owner, Bradford Remodeling Co – West Palm Beach at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and nearby areas.
