Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose Jerith Construction
Bradford Remodeling Co West Palm Beach provides independent Jerith service in West Palm Beach, including fence and gate repair and installation throughout the area. We’ve worked on Jerith Estate, Manor, Sierra, and Classic lines for over a decade, fixing the specific failure modes these products develop in coastal Florida conditions. We are not a Jerith dealer or authorized service center. We’re a local West Palm Beach contractor who knows these products from field experience, not from a training manual, and we put every price and guarantee in writing before work begins.
Call (728) 203-9809 for a Jerith service estimate in West Palm Beach.
Key takeaways: independent Jerith service, genuine hardware when requested, marine-grade upgrades for coastal corrosion, written pricing, 365-Day Done Right Promise on every completed job.
Why Trust Bradford Remodeling Co West Palm Beach for Your Jerith Construction?
Jerith aluminum fencing has a particular metallurgy. It’s extruded 6000-series aluminum with a proprietary powder coat, and it behaves a certain way when salt air, hurricane winds, and South Florida humidity hit it year after year. Our crews know exactly where Jerith gates fail: the hinge stile, the post base, the latch strike. We know which fasteners Jerith ships from the factory and why those fasteners don’t hold up near the Intracoastal. We know the difference between a gate leaf that dropped because the hinges wore and one that dropped because the post shifted in bad concrete. That kind of diagnostic precision only comes from doing the work, and we’ve done it on properties from Flamingo Park to Palm Beach Island.
Curtis Lane, owner of Bradford Remodeling Co West Palm Beach, cut his teeth at Los Angeles Trade-Technical College and has been running crews for nearly three decades. He’s been managing jobs in West Palm Beach long enough to know the local soil alkalinity, the wind zones, and which repairs the salt air will undo in a year if you cut corners. The Garrison Standard is behind every Jerith job we take: a written price before any work starts, background-checked uniformed technicians, and a signed guarantee in your hand when the job closes.
Styles & brands we work with
Common Jerith Construction Problems We Fix in West Palm Beach
- Sagging gate leaves on Jerith Estate and Manor entry gates. The hinge stile on 6-foot and 8-foot gate leaves takes enormous wind load in West Palm Beach. We routinely find elongated screw holes at the hinge stile, which lets the gate drop and the latch strike misalign. A half-inch drop is enough to jam the center latch on a double-leaf Estate gate.
- Electrolytic corrosion at post bases. Jerith posts set with uncoated steel fasteners or embedded directly in concrete develop white, crusty corrosion at the base within a few years. This is accelerated by West Palm Beach’s high water table and salt intrusion. The post doesn’t fail overnight; it loosens, then the entire fence section sways under load.
- Powder coat chalking and blistering near the coast. Salt-laden wind off the Atlantic does a number on factory powder coat. We see chalky white residue on Jerith rails within two to three years on properties near the Intracoastal. Blistering follows if the coating wasn’t prepped properly at install. The fix isn’t repainting; it’s proper surface remediation and re-coating with marine-grade product.
- Self-closing hinge spring breakage on Estate and Manor gates. Jerith’s factory self-closing hinges use tension springs that fatigue. We replace snapped springs on gates that are three to five years old, often in pairs because the working spring has been carrying the dead spring’s load. It’s a small part, but a broken spring means the gate won’t close and latch, which is a security issue for anyone with a pool or pets.
- Latch strike failure from wind load against pool screen enclosures. In West Palm Beach, many Jerith gates are installed adjacent to pool screens. The wind loads on those screens transfer to the gate framing. We’ve repaired Estate gate leaves that dropped over an inch and caused the center latch strike to jam. That’s not a latch problem; it’s a structural hinge stile problem masquerading as a latch problem.
Jerith Parts & Our Repair-vs-Replace Approach
When a Jerith gate needs parts, we give you the real options. Genuine Jerith hardware, including hinges, latch strikes, and tension springs, gives an exact color and profile match. For visible hardware, that’s usually the right call. But for non-visible structural repairs, we often source marine-grade 6061 aluminum and 316 stainless fasteners. Those materials hold up better in West Palm Beach’s coastal environment than the factory steel hardware Jerith ships. We tell you which is which and why, and the written estimate lists the exact part before we order anything.
Our repair-vs-replace decision is straightforward. If the gate top rail has deformed more than a quarter inch, we recommend replacing the gate frame. Rewelding thin extruded aluminum creates brittle heat-affected zones, and you’ll be fixing the same crack again next season. If the frame is true and the damage is isolated to hardware, repair is the honest call. We stock common Jerith hinge springs, latch strikes, and post-base shims locally for faster turnaround. Call (728) 203-9809 for a straight answer on your Jerith repair.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We inspect the gate leaf, hinge stiles, post bases, and latch alignment. We measure deflection, check fasteners for electrolytic corrosion, and note any powder coat degradation. You get a written scope with the findings, not a verbal summary.
- 2
Repair or install. For repairs, we re-drill stripped hinge stile holes for stainless helicoil inserts, replace hardware with genuine Jerith or marine-grade equivalents as specified, and adjust self-closing tension springs to factory spec. For new Jerith fence or gate installation in West Palm Beach, we set posts to meet Miami-Dade wind load requirements and use concrete with proper drainage geometry.
- 3
Testing. Every repaired or installed gate gets cycled through full open and close at least 20 times. We check latch strike engagement, spring tension, and post stability. If the gate doesn’t swing true and latch with a light push, we’re not done.
- 4
Warranty. You leave the job with a signed 365-Day Done Right Promise. If the repair or install fails within one year, we come back and correct it at no charge. That’s not a verbal promise; it’s in writing.
One field example: our tech responded to a Palm Beach Island property where two Jerith Estate 6-foot gate leaves had dropped over an inch, causing the center latch strike to jam. We found the hinge stile screw holes had elongated from years of wind load against the pool screen enclosure. Rather than patch the stripped holes, we re-drilled the stile to accept stainless steel helicoil inserts, replaced the original steel hinge screws with 316 stainless, and adjusted the self-closing tension springs to spec. The gates now swing true and latch with a light push.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in West Palm Beach
Our crews service and install the full Jerith residential line: Jerith Estate Aluminum Fence, Jerith Manor Aluminum Fence, Jerith Classic Aluminum Gate, and Jerith Sierra Vinyl Fence via Jerith’s vinyl line. We keep common replacement hardware in local stock: hinge tension springs, latch strikes, post caps, and marine-grade fasteners sized for Jerith extrusions. For full-section replacements, we order Jerith sections matched to your existing profile and powder coat color. In West Palm Beach, we also install Jerith gates with automatic opener prep, including wiring chases and reinforced hinge stiles for actuator mounting.
We Also Service These Brands
While Jerith is a core specialty of our West Palm Beach crew, we’re also a General Contractor. Our teams also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. That matters because many homeowners with Jerith perimeter fencing also need gate-adjacent hardscaping, exterior door work, or impact-rated improvements. One crew, one written price, one standard.
FAQs – Jerith Construction Service in West Palm Beach
No. We are an independent Jerith service provider. We are not a Jerith dealer or authorized warranty center. That independence matters because we’re not bound by franchise protocols when choosing repair methods or materials. We recommend what holds up in West Palm Beach’s coastal conditions, not what a corporate manual prescribes. Every repair is documented and warrantied by us.
We do not recommend welding thin extruded Jerith aluminum frames. The heat creates brittle zones that crack again. If the top rail has deformed more than a quarter inch, replacement is the honest fix. If the damage is limited to stripped screw holes at the hinge stile, we re-drill for stainless steel helicoil inserts and upgrade the fasteners. That repair outlasts the original hardware. Call (728) 203-9809 and we’ll tell you which one your gate needs.
That white chalky residue is powder coat chalking. Salt-laden wind accelerates UV and chemical breakdown of the factory coating, especially on properties within a mile of the Intracoastal in West Palm Beach. It’s a known issue with aluminum fence powder coats in marine environments. The proper fix is surface remediation and re-coating with a marine-grade product, not a quick spray-over that peels in six months.
West Palm Beach sits in a high-velocity wind zone, and Miami-Dade standards apply to new construction. Jerith fences are engineered for these loads, but installation quality determines whether the fence actually performs. We set posts at depths that account for our sandy, high-water-table soil conditions, and we use concrete geometry that prevents water pooling at the post base. If a fence was installed shallow or with poor drainage, it will loosen under hurricane wind loads regardless of the manufacturer’s engineering.
In most cases, yes. The Jerith Manor gate leaf can support an automatic opener if the hinge stile is reinforced and the post bases are solid. Wind load on a motorized gate is different than on a manual gate, so the opener arms and mounts need proper backing. We prep the gate for actuator mounting and run the wiring chase during installation. If your existing gate has hinge stile wear, that gets corrected before the opener goes on.
Here are our current Jerith service price ranges in West Palm Beach:
| Service | Price Range |
|---|---|
| Jerith aluminum fence gate realignment & hinge repair | $150 – $400 |
| Aluminum fence post reset/re-set in concrete | $120 – $300 |
| Aluminum fence section replacement (per linear foot) | $45 – $90 |
These are written-price ranges. Your exact quote is in writing before any work starts, and that number doesn’t move at the door. Call (728) 203-9809 for an exact quote, estimates are free.
Factory-fresh Jerith sections will not match a five-year-old powder coat exactly. Sun and salt fade the original coating over time, especially on coastal West Palm Beach properties. We order sections matched to your existing profile and current coating condition, and we’ll tell you honestly if a full-run replacement makes more sense than a patch. The written estimate includes the match considerations before you spend a dollar.
Book Your Jerith Service in West Palm Beach, FL
If your Jerith gate is sagging, your posts are loosening, or your powder coat is chalking near the Intracoastal, we’ll diagnose it and give you a written price before any work starts. Straight number, full scope, no surprises after the invoice. Call (728) 203-9809 to schedule your Jerith service estimate in West Palm Beach.
Written by Curtis Lane, Owner at Bradford Remodeling Co West Palm Beach, serving West Palm Beach since 2004.
