Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose Therma-Tru Construction
Bradford Remodeling Co West Palm Beach provides Therma Tru service in West Palm Beach, from entry door replacements to storm-damage repairs. We’re not a Therma-Tru authorized dealer or affiliated with the manufacturer; we’re remodelers who install and repair their doors on real jobs every week. Our crews know which Therma-Tru failure patterns show up in this climate, and we fix them so the door doesn’t fail again next hurricane season. Call (728) 203-9809 to have a real person talk through your door problem.
We work Therma-Tru entry doors and framing on nearly every full remodel we do in West Palm Beach. Fiber-Classic™ Mahogany slabs with delaminating bottom rails, Smooth-Star™ steel doors with rust bleeding around the hinge cutouts, Pulse™ doors that bind after the foam core settles. The salt air here accelerates every metal component, and the wind-driven rain finds every gap in an older weatherstrip. A door that looks fine from six feet away is often failing at the threshold, the brickmould, or the sill pan underneath. We look for those failures because experience says that’s where West Palm Beach doors die first.
As an independent Therma-Tru service provider, we answer to you, not to a manufacturer’s service territory map. That means straight pricing before work starts, no change orders at the door, and a full year of written coverage on every repair. Curtis Lane runs our West Palm Beach operation. He’s been working remodels and repairs in this city long enough to know the local building department’s inspection timelines and how many times a door frame gets kicked by a summer squall before it starts to move.
Why Trust Bradford Remodeling Co West Palm Beach for Your Therma-Tru Construction?
Our crews have installed and repaired more Therma-Tru units in West Palm Beach than most door-only contractors see in a career. That matters when the door you’re dealing with is a Fiber-Classic™ slab with subtle skin delamination at the rail, or a Smooth-Star™ unit where the factory seals failed four years ago and the hinge reinforcements are corroding from the inside. We spot those failures early because we’ve seen the same pattern on dozens of homes along the Intracoastal and in neighborhoods like Flamingo Park and El Cid.
Curtis grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending the better part of three decades swinging a hammer and managing crews on everything from slab foundations to full gut renovations. He’s been running jobs in West Palm Beach for years as a General Contractor, including notable work along the Northwood Village corridor. He knows the local soil conditions, inspection timelines, and hurricane-strapping requirements the way most people know their own kitchen layout. If he quotes a number, that’s the number. If something changes in the field, he calls you before he touches it.
Every Therma-Tru job we take on follows The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians on site, and a signed 365-Day Done Right Promise when we finish. If the door fails inside that window, we come back and correct it at no charge. We back that with OEM parts whenever the original is still in production, because aftermarket corner seals and sweeps leak within two summers in this humidity.
Key takeaways:
- We service Fiber-Classic™, Smooth-Star™, Pulse™, and Benchmark™ lines across West Palm Beach.
- Written price before work starts. Always. The number on the quote is the number on the invoice.
- 365-Day Done Right Promise. If the work fails within a year, we return and fix it free.
- OEM parts used whenever the original is still in production. Aftermarket seals don’t hold up here.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in West Palm Beach
These are the failure patterns we see repeatedly across West Palm Beach, and each one has a specific cause. A generic handyman will often throw a new sweep or shim at the problem and call it fixed. Here’s what’s actually going on and what it takes to correct it.
- Fiberglass skin delamination at the bottom rail, Fiber-Classic™ Mahogany Collection. Wind-driven rain on east-facing entries near the Intracoastal forces water into the microscopic gap between the fiberglass skin and the rail. Over time the skin lifts and soft spots form. In Flamingo Park, we also see irrigation overspray hitting the same rail every day, which accelerates it. Proper fix: replace the slab with a rot-proof composite frame and re-caulk behind the brickmould. Patching delaminated fiberglass is a temporary band-aid.
- Corroded steel hinge reinforcements on Smooth-Star™ doors. Therma-Tru’s Smooth-Star™ line uses steel hinge reinforcements inside the door. When the factory seal around the hinge prep degrades, coastal salt air gets in and the steel rusts. You’ll see rust bleeding around the hinge cutouts. If caught early we can clean, treat, and re-seal the hinge points with OEM hinges and fasteners. If the steel is swollen or crumbling, the slab gets replaced.
- Sagging or binding on Pulse™ doors after the foam core settles. Pulse™ doors are lighter than Fiber-Classic™ units, and when the original frame was installed without proper shimming behind the hinges, the foam core settles and the door starts dragging at the top latch side. Residents in mid-century concrete block homes throughout West Palm Beach see this after a few years, often as the slab settles too. The fix is re-hanging the door on properly shimmed hinges and resetting the frame reveal.
- Warped or cracked brickmould on Fiber-Classic™ units that were never back-caulked behind the sill. Water wicks up behind the brickmould from the sill pan and sits there. Termites find it. The brickmould cracks, then the frame starts to move. We remove the old brickmould, replace with a composite or PVC option that won’t rot in West Palm Beach humidity, and caulk the full perimeter, including behind the sill.
- Weatherstrip failure at the threshold on Benchmark™ doors. The builder-grade Benchmark™ line ships with a basic sweep and corner seals. In South Florida, those seals break down fast under UV and heat. Water gets under the threshold and into the subfloor. We replace with a full-perimeter Q-Lon™ weatherstrip and a new adjustable threshold, and we check the sill pan underneath. If the pan is missing or crushed, that gets corrected while we’re there.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Here’s the honest part most door companies won’t tell you: a lot of “Therma-Tru repairs” should be replacements. A delaminated Fiber-Classic™ slab can’t be re-glued and made structurally sound. A Smooth-Star™ door with swollen steel reinforcements is a liability, not a repair. We’ll tell you that straight, the way Curtis would on a job walk: “Straight number, full scope, no surprises after the invoice.”
For Therma-Tru work, we use OEM slabs, hinges, thresholds, and weatherstrip whenever they’re still in production. The aftermarket corner seals and sweeps cost $20 less and leak within two summers. That’s a false economy in a climate where a leaking threshold means subfloor rot before you notice the problem. We stock common Therma-Tru hardware at our West Palm Beach shop: hinge sets, adjustable thresholds, Q-Lon™ weatherstrip, corner seals, and brickmould profiles for the Fiber-Classic™ and Smooth-Star™ lines. Less common parts we order direct, and we’ll give you a written lead time before any work starts.
We recommend replacement only when the original slab is delaminated or the frame rails are rotted. Otherwise we repair with OEM hardware and re-hang. That’s the discipline: no upselling to a new door you don’t need, no patching a door that’s already dead. Call (728) 203-9809 to talk through what you’re seeing at your door, and we’ll tell you honestly which side of the line you’re on.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the full entry system: the slab, hinges, frame, threshold, sill pan, brickmould, and weatherstrip. Water tests identified where the leak actually starts, not just where water shows up on the interior floor. In West Palm Beach, that’s usually not the same place.
- 2
Repair or replace, with a written price. We give you a line-item quote that separates parts from labor and states which parts are OEM and which, if any, are not. No numbers move after you sign. If we find hidden damage during the work, we call you before touching it.
- 3
Installation and sealing. We re-hang or replace the slab, set the frame with proper shimming, and replace all weatherstrip. Behind the brickmould gets caulked. The sill pan gets checked and corrected. Every penetration gets sealed against the West Palm Beach rain this door will face.
- 4
Test and close out. We run the door through full open-close cycles, check the reveal all the way around, run a water test on the threshold, and confirm the latch and deadbolt align. You’ll have your signed 365-Day Done Right Promise in hand before our truck leaves. The site is clean, the scope is documented, and the door does what it’s supposed to do.
Therma-Tru Products We Service & Install in West Palm Beach
Our crews work across the Therma-Tru line that actually shows up in West Palm Beach homes:
- Fiber-Classic™ Mahogany Collection – fiberglass entry doors with deep wood-grain textures, common in the Mediterranean Revival homes of El Cid and the 1950s and 60s stock throughout the city.
- Smooth-Star™ – steel and fiberglass entry doors, the workhorse for mid-century concrete block ranches.
- Pulse™ – contemporary fiberglass doors, often specified for high-rise condo entries and modern renovations.
- Benchmark™ by Therma-Tru – builder-grade steel and fiberglass doors, frequently installed by tract builders across Palm Beach County.
We stock hinge sets, thresholds, weatherstrip, corner seals, and brickmould for these lines at our local shop. If you need a slab matched for grain pattern and color, we’ll pull samples and get it ordered before the old door comes off the hinges.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
While Therma-Tru doors are a core part of our entry and exterior work in Palm Beach Gardens and beyond, we’re multi-brand by design. Our West Palm Beach remodels also involve KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That matters when your door project is part of a larger renovation. We’re not a door-only shop pretending to know how the rest of the house goes together.
What Does Therma-Tru Service Cost in West Palm Beach?
Therma-Tru door repair in Wellington and nearby areas is usually part of a broader project. Here’s what we see across West Palm Beach:
| Project | Price Range |
|---|---|
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
These are project ranges. A door-specific repair (weatherstrip replacement, hinge re-hang, threshold reset) runs substantially less. A full entry system replacement with a composite frame and new slab runs toward the upper end of what you’d put into a small kitchen remodel budget. We’ll give you an exact number before any work starts. That’s the whole point of our written pricing.
FAQs – Therma-Tru Construction Service in West Palm Beach
No, we’re an independent Therma-Tru service provider. We’re not an authorized dealer or manufacturer affiliate. So we answer to you and to The Garrison Standard, not to a manufacturer’s service territory map.
We use OEM slabs, hinges, thresholds, and weatherstrip whenever they’re still in production, because aftermarket seals and sweeps leak within two summers in this humidity. Where an OEM part is discontinued, we’ll tell you and walk through the alternative before any work starts.
A typical hinge re-hang or weatherstrip replacement is done in a day. A full slab replacement with a composite frame and sill pan correction typically runs two to three days from the time the slab arrives. We’ll give you a written lead time before work starts, and we call if that changes. Call (728) 203-9809 for a straight answer on your specific door.
Fiber-Classic™ Mahogany Collection, Smooth-Star™, Pulse™, and Benchmark™. If you’ve got a different line, call us. We’ll confirm whether we can get the parts and give you a written price either way.
No. We use OEM parts and follow Therma-Tru’s installation tolerances, so our work won’t void a valid manufacturer warranty. And our own 365-Day Done Right Promise covers the work we do regardless of what the manufacturer’s warranty says. If the repair fails inside that year, we come back and correct it at no charge.
Fiberglass doesn’t rot, but the skin can delaminate from the rail. What you’re feeling is separation, not wood rot. That said, if water’s been getting in long enough, the wood or composite frame behind that slab may have rot. We need to look at the frame, the sill pan, and the brickmould to give you a straight answer. Call (728) 203-9809 to schedule a diagnosis.
Yes. Usually that’s a hinge issue, not a slab issue. The door gets re-hung with proper shimming behind the hinges, and we reset the frame reveal. On mid-century concrete block homes in West Palm Beach, settlement is common, and the fix is usually a couple of hours. Call (728) 203-9809 to get it looked at before the rubbing wears down the weatherstrip and lets air and rain through.
Sometimes. If the steel hinge reinforcements are still structurally sound, we clean, treat, and re-seal the hinge points with OEM hardware. If the steel is swollen or crumbling, the slab needs to be replaced. There’s no sound way to repair corroded structural steel inside a door. We’ll tell you which side of that line you’re on.
Fiber-Classic™ Mahogany Collection slabs can be matched from the manufacturer’s stain and finish samples. We’ll match the grain pattern and finish against the existing door before ordering, so the new slab doesn’t show as an obvious patch against the rest of the entry. It requires a bit of patience and the right samples, and we handle that.
Not usually. We can remove the threshold, inspect and correct the sill pan, replace the threshold with a new adjustable unit, and re-caulk behind the brickmould without pulling the entire frame. If the frame rails themselves are rotted, that’s a different conversation. We’ll know after a water test and a close look at the sill pan.
Book Your Therma-Tru Service in West Palm Beach, FL
If your Therma-Tru door is leaking, binding, delaminating, or just not closing right, call (728) 203-9809. You’ll get a live person, a straight diagnosis, and a written price before any work starts. Curtis Lane and the Bradford Remodeling Co West Palm Beach crew will make the door do what it’s supposed to do.
Written by Curtis Lane, Owner at Bradford Remodeling Co West Palm Beach, serving West Palm Beach and surrounding communities.
