Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction repair and installation service across West Palm Beach, handling frameless shower enclosures, heavy glass sliding doors, impact-rated windows, and custom mirror work in homes and condos throughout the area. We’re not an authorized Mr-Glass dealer and we don’t claim to be. What we are is a local contracting crew that has worked with Mr-Glass components in South Florida’s salt air, hard water, and hurricane conditions long enough to know exactly where these products fail and how to fix them without replacing what doesn’t need replacing. Call (728) 203-9809 to talk through your Mr-Glass issue with a live person.
The reality of West Palm Beach is that glass takes a beating here. Salt air corrodes hardware. Hard water etches shower panels. Hurricane-driven rain tests every seal. That’s why Mr-Glass product owners in neighborhoods from El Cid to Flamingo Park call us when their enclosures start dragging, leaking, or showing stress cracks. We give you a straight answer on what’s fixable and what’s not, and we put the price in writing before any work starts.
Why Trust Bradford Remodeling Co West Palm Beach for Your Mr-Glass Construction?
Our crews have installed and repaired Mr-Glass components in Wellington and across South Florida for more than a decade, and Curtis Lane, our owner, has been running jobs in West Palm Beach for years, including work along the Northwood Village corridor. He knows the local inspection timelines, the hurricane-strapping requirements, and the way coastal conditions chew through hardware that would last decades inland. That local knowledge matters when you’re deciding whether a Mr-Glass sliding door needs new rollers or a full panel replacement.
We stock OEM rollers, hinges, and seals for the Mr-Glass product lines we service most, because tolerances on frameless glass matter. A roller that’s a millimeter off will make a heavy glass door drag, and dragging leads to misalignment, and misalignment leads to cracked panels. When OEM parts aren’t available for discontinued Mr-Glass trim or hardware, we source aftermarket parts that match the original finish and load specifications. We don’t guess. We measure, we inspect, and we tell you the truth about what your Mr-Glass product needs. Every job gets a written price before work starts, and every completed project carries our 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in West Palm Beach
- Roller and track wear on Mr-Glass Heavy Glass Sliding Door Systems. Sandy coastal air gets into the track and grinds against the rollers. Within a few years, the door starts dragging or jumping off the track entirely. We see this constantly in West Palm Beach condos near the Intracoastal, where salt corrosion seizes the original hardware. The fix is usually new OEM rollers and a track inspection, not a new door.
- Discoloration and seal breakdown on Mr-Glass Neo-Angle Frameless Shower Series enclosures. Hard water is relentless in West Palm Beach. Mineral deposits build up along the glass, but the real problem is what happens at the seals and hinges. High humidity and constant wet-dry cycles degrade the seal material, leading to slow leaks at the corners and along the base. We replace seals, re-align panels, and recommend a water treatment approach that actually works for this climate.
- Stress cracks at corner notches of Mr-Glass Neo-Angle shower panels. This is a signature issue, and we’ve traced it to improper shimming during original installation. When the panel isn’t supported evenly, the notched corner becomes a stress point. We remove the panel, inspect the substrate behind it, and reinstall with proper shimming so the replacement doesn’t crack the same way.
- Weakened protective glazing on Mr-Glass Impact-Resistant Window Series units. After repeated hurricane-driven rain and intense UV exposure, the protective glazing on impact windows can haze, peel, or delaminate. That compromises the impact rating. We assess whether the glazing can be restored or whether the unit needs replacement, and we’re straight with you about which path makes sense for your home and your insurance requirements.
- Hardware corrosion on Mr-Glass Custom Mirror and Shelving Line installations. In bathrooms and kitchens near the coast, the metal clips and brackets that hold Mr-Glass mirrors and shelves corrode faster than expected. We replace corroded hardware with materials rated for coastal environments and inspect the mounting surface to make sure the substrate is still sound.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass products, we use OEM rollers, hinges, seals, and glass panels when they’re available. The reason is simple: these components are machined to work together. An aftermarket roller that’s slightly off-spec will change the door’s alignment, and misalignment on a heavy glass panel is a slow-motion crack. When OEM parts are discontinued, we source quality aftermarket components that match the original finish and load specs, and we tell you what we’re using and why before we install it.
Our general rule: repair over replace for roller issues, seal failures, and minor hardware problems. That’s usually a $400 to $1,800 job. Full glass panel replacement is warranted when there’s a crack, delamination, or a compromised impact rating that puts your safety or storm protection at risk. We’ll show you the damage and explain the decision in plain language. Call (728) 203-9809 to schedule an assessment, and you’ll get a written quote you can hold us to.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the Mr-Glass product on site, measure panel alignment, check roller and track wear, and identify the specific failure point. For shower enclosures, we look for seal degradation, improper shimming, and substrate issues behind the glass. You get a written diagnosis and a written repair scope.
- 2
Repair or install. We use OEM or spec-matched parts for Mr-Glass components. For heavy glass doors, we replace rollers and tracks, realign panels, and torque hardware to manufacturer specs. For impact windows, we follow South Florida code requirements for hurricane-rated installation, including proper anchoring and flashing.
- 3
Test. Every Mr-Glass sliding door gets a full open-close cycle test after repair. Shower enclosures get a water test to confirm no leaks at the base or corners. Impact windows get a seal and alignment check. We don’t call a job done until the product performs the way it should.
- 4
Warranty. You get our 365-Day Done Right Promise in writing before we leave. If the repair or install fails within a year, we return and correct it at no charge. That’s the Garrison Standard, and it applies to every Mr-Glass job we complete in West Palm Beach.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in West Palm Beach
We service and install across the Mr-Glass product range, including the Neo-Angle Frameless Shower Series, the Heavy Glass Sliding Door System, the Impact-Resistant Window Series, and the Custom Mirror and Shelving Line. We stock OEM rollers, hinges, seals, and track components locally for faster turnaround on the most common Mr-Glass repairs in West Palm Beach. For full installations, we handle the rough-in, waterproofing, and finish work as part of a complete remodeling scope, whether that’s a walk-in shower conversion, a bathroom renovation, or a coastal window replacement.
We Also Service These Brands
While we’ve built deep familiarity with Mr-Glass products, we’re a full-service remodeling contractor. We also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That matters when a Mr-Glass shower enclosure is one piece of a larger bathroom remodel, and you want one crew accountable for the entire job from rough-in to finish.
FAQs – Mr-Glass Construction Service in West Palm Beach
Can you repair the rollers and track on my Mr-Glass Heavy Glass sliding door without replacing the whole panel?
Yes, in most cases we can. We stock OEM rollers for Mr-Glass Heavy Glass sliding doors and replace the track when corrosion or wear has damaged it. We did exactly this for a Mr Glass in Palm Beach Gardens condo where salt air had seized the original hardware. After realigning the panels and installing new OEM rollers, the door glided smoothly and the homeowner avoided a full enclosure replacement. If your door is dragging or jumping the track, call (728) 203-9809 and we’ll assess whether a roller and track replacement is enough. Most of these repairs run between $300 and $1,200.
Do Mr-Glass frameless shower enclosures in West Palm Beach need special maintenance due to hard water?
Yes. West Palm Beach water is hard, and the mineral content will etch glass and degrade seals faster than in other parts of the country. We recommend a squeegee after each shower and a regular cleaning with a non-abrasive product safe for frameless glass. For enclosures already showing seal breakdown or mineral staining, we replace the seals and re-align the panels so water stays where it belongs. Call (728) 203-9809 for a quote on seal replacement for your Mr-Glass enclosure.
Why do Mr-Glass Neo-Angle shower panels sometimes crack at the notched corners?
This is almost always an installation issue, not a manufacturing defect. When the panel isn’t shimmed evenly behind the glass, the notched corner becomes a stress point that eventually cracks. We remove the cracked panel, inspect the substrate behind it, and reinstall with proper shimming so the replacement panel sits evenly and doesn’t repeat the failure. If you see a crack forming at the corner of your Mr-Glass Neo-Angle panel, call (728) 203-9809 before it spreads.
What should I do if my Mr-Glass impact windows look hazy or have peeling film?
That’s a sign the protective glazing is breaking down from UV exposure and repeated hurricane-driven rain, which is common for coastal homes in West Palm Beach. The impact rating may be compromised, so we recommend an inspection to determine whether the glazing can be restored or the unit should be replaced. Impact window replacement typically runs $8,000 to $25,000 depending on the number of units and window sizes. Call (728) 203-9809 and we’ll give you a written assessment and a straight answer on what your windows actually need.
Are you able to install a Mr-Glass frameless shower enclosure in a bathroom renovation alongside new tile and plumbing?
Yes. We handle the full bathroom scope, from rough-in plumbing to waterproofing, tile, and the Mr-Glass enclosure installation. Having one crew accountable for the whole job means the enclosure gets measured and installed correctly against finished tile, not retrofitted to someone else’s work. Bathroom remodels in West Palm Beach typically run $9,000 to $28,000 depending on scope. Call (728) 203-9809 for a written quote on your specific project.
Is Bradford Remodeling Co West Palm Beach authorized by Mr-Glass?
No. We’re an independent contractor with extensive Mr-Glass installation and repair experience. We’re not affiliated with or authorized by Mr-Glass, and we don’t claim manufacturer authorization. What we offer is hands-on familiarity with Mr-Glass product lines, access to OEM parts, and a written guarantee on every job we complete.
Book Your Mr-Glass Service in West Palm Beach, FL
Straight number, full scope, no surprises after the invoice. That’s how Curtis Lane runs every Mr-Glass job we take on in West Palm Beach. Call (728) 203-9809 for a free estimate. You’ll get a live person on the phone and a written price before any work starts.
Written by Curtis Lane, Owner at Bradford Remodeling Co West Palm Beach, serving West Palm Beach since 2004.
