Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose KraftMaid Construction
Bradford Remodeling Co West Palm Beach provides independent KraftMaid construction service and repair across West Palm Beach, from cabinet installation and refacing to full kitchen remodels built around KraftMaid cabinetry. We’re not a KraftMaid dealer and we’ve never claimed to be. What we are is a crew that has worked on hundreds of KraftMaid kitchens and baths in Palm Beach County, learning the quirks of their construction and hardware without any factory ties. If you own KraftMaid cabinets and something’s failing, sagging, or peeling, call (728) 203-9809 and we’ll diagnose it straight.
Why Trust Bradford Remodeling Co West Palm Beach for Your KraftMaid Construction?
Most cabinet work fails because someone rushes the details that don’t show. KraftMaid builds a solid cabinet, but its hardware and finishes have specific weak points that only show up after years of use, especially in West Palm Beach’s coastal air. Our crews know those weak points by name. We adjust soft-close hinges on Vantage and Benton lines, replace worn drawer glides, and repair thermofoil peeling before it spreads. Curtis Lane, who leads Bradford Remodeling Co West Palm Beach, learned the trade at Los Angeles Trade-Technical College and has been running jobs in West Palm Beach for years, including work along the Northwood Village corridor. He built his reputation on accurate estimates and clean finishes, including Kraftmaid service in West Palm Beach. If he quotes you a number, that’s the number. Straight number, full scope, no surprises after the invoice.
We also operate under The Garrison Standard, which means every KraftMaid repair or installation gets a written price before work starts and a signed 365-Day Done Right Promise when it’s finished. If the work fails inside a year, we come back and correct it at no charge. That’s the guarantee in writing, not a handshake.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in West Palm Beach
West Palm Beach’s subtropical climate accelerates certain KraftMaid failure modes. Intense sun, heavy rain, and salt air don’t just affect roofs and windows. They work on cabinet finishes and hardware too, especially in older condos near the Intracoastal where humidity sits high year-round. Here’s what we see most often:
- Soft-close drawer glides losing tension on Vantage and Benton lines. The soft-close mechanism is a small hydraulic damper inside the glide. After thousands of cycles, the damper wears out and the drawer starts slamming shut. West Palm Beach’s humidity doesn’t cause this directly, but it accelerates corrosion on the metal glide components. We replace the glide kit and reset the drawer alignment, which is faster and cheaper than replacing the cabinet.
- Thermofoil peeling on cabinet door edges in high-humidity coastal kitchens. Thermofoil is a vinyl layer heat-bonded to an MDF core. When moisture gets into the seam, usually near the dishwasher or sink base, the bond fails and the foil starts lifting. Once it peels, it won’t re-bond. We either replace the door front or refinish it with a paint-grade replacement that matches the existing run. This is one of the most common calls we get from condo buildings near the water in West Palm Beach.
- Adjustable shelf clips cracking and dropping shelves in Durham wall cabinets. Durham wall cabinets use plastic shelf clips that get brittle over time. A loaded shelf of dishes puts constant pressure on four small clips. When one cracks, the shelf drops and the dishes go with it. We stock replacement shelf supports for Durham and other KraftMaid lines, and we check every clip in the cabinet while we’re at it.
- Hinge screws stripping out of particleboard side panels after repeated door removals. KraftMaid doors are heavy. When someone removes a door multiple times, whether for painting or re-leveling, the original screws chew up the particleboard. The screw holes wallow out and the door sags. We fill the stripped holes with epoxy, remount with longer screws that bite into the cabinet sides, and adjust the hinge geometry.
- Sagging doors and misaligned reveals on Hadley wall cabinets. Hadley has a wider door profile than Vantage, which puts more leverage on the hinge plates. Over time, the top hinge plate flexes and the reveal opens up. The door looks crooked and won’t sit flush. The fix is hinge adjustment plus remounting if the screws have stripped.
In a 1980s condo near Palm Beach Lakes, our tech found three Hadley wall cabinets with sagging doors and stripped hinge screws. We removed the doors, filled the stripped holes with epoxy, remounted with longer screws into the cabinet sides, and adjusted every hinge in the run, restoring the original alignment without replacing a single door. That’s the approach we take on every KraftMaid job in West Palm Beach: diagnose the actual failure, fix what’s broken, and leave the rest alone.
KraftMaid Parts & Our Repair-vs-Replace Approach
We stock common OEM KraftMaid hardware in our West Palm Beach shop: hinge clips, shelf supports, drawer glide kits, and mounting plates. For discontinued colors or damaged door fronts, we source quality aftermarket thermofoil or paint-grade replacements and refinish them to match the existing run. The goal is to make the repair invisible, not to sell you a new kitchen.
Our rule is simple. If the cabinet box is sound and the face frame is intact, repair and adjust before recommending a full replacement. A solid KraftMaid cabinet with a worn glide is a $40 parts job. A new cabinet is hundreds. We won’t push replacement unless the structure is genuinely compromised. That’s how you build trust in a market where too many contractors quote a full tear-out because it’s easier for them. Call (728) 203-9809 if you want an honest read on your KraftMaid cabinets.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the full cabinet run, not just the one door you called about. We check hinge plates, glide tension, shelf clips, and finish condition. We identify whether it’s a hardware failure, a structural issue, or both. This is where knowing KraftMaid’s specific lines matters. A Benton hinge failure and a Durham shelf clip crack have different causes and different fixes.
- 2
Repair or installation. We quote a written price before any work starts, per The Garrison Standard. If it’s a repair, we use OEM KraftMaid parts where they’re available and quality aftermarket equivalents where they’re not. If it’s an installation, we level every cabinet, shim where needed, and check reveals as we go.
- 3
Testing. Every drawer gets cycled, every door gets opened and closed, every soft-close mechanism gets checked. We adjust until the action is consistent across the entire run. On installs, we check hinge alignment before the countertop goes on, not after.
- 4
Warranty. At close, you get a signed written guarantee under the 365-Day Done Right Promise. If the repair or install fails inside a year, we return and correct it at no charge. That’s not a verbal promise. It’s in writing, in your hand, before we leave the site.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in West Palm Beach
We work on all four major KraftMaid lines common in West Palm Beach homes: Vantage, Benton, Durham, and Hadley. Vantage and Benton are full-overlay lines with soft-close hardware. Durham and Hadley offer a more traditional face-frame look with a wider door profile. Each has its own hardware specs and failure points, and our crews know the difference. We stock common glide kits, hinge clips, and shelf supports for these lines locally, which means faster turnaround on repairs. We also install new KraftMaid cabinetry in Palm Beach Gardens as part of full kitchen remodels, including Cabinet Installation & Refacing, Kitchen Design & Layout, and Full Kitchen Remodeling.
We Also Service These Brands
KraftMaid is a big part of our work in West Palm Beach, but it’s not the only brand we touch. We install and service Cambria and Silestone countertops, Kohler and Toto fixtures, and full kitchens built around whatever cabinet line makes sense for your budget and your space. Multi-brand experience means we’re not married to one manufacturer’s catalog. We recommend what actually fits the job.
FAQs – KraftMaid Construction Service in West Palm Beach
Yes, soft-close hinge adjustment is a standard repair for KraftMaid Vantage and Benton cabinets in West Palm Beach. The hinge has adjustment screws for height, depth, and side-to-side alignment. In most sagging-door cases, the issue is hinge plate flex or stripped mounting screws, not the cabinet itself. If the soft-close damper inside the hinge has failed, we replace the hinge pair. Call (728) 203-9809 and we’ll tell you if it’s an adjustment or a replacement part.
Thermofoil peeling near the dishwasher is caused by steam and moisture weakening the adhesive bond between the vinyl foil and the MDF core. The dishwasher vent releases hot, humid air directly onto the cabinet door edge. Over months, that moisture works into the seam and the foil starts to lift. This is common in West Palm Beach because our ambient humidity is already high. The fix is usually a replacement door front or a paint-grade refinish on the affected panel. A quick call to (728) 203-9809 gets you a straight answer.
Yes, we can match most discontinued KraftMaid door styles. We source aftermarket thermofoil or paint-grade door fronts and refinish them to match your existing run. The match won’t always be perfect on very old finishes that have faded with sun exposure, but we’ll show you a sample before we order. If you’re adding a small run of cabinets in West Palm Beach and need a matching door, call (728) 203-9809 and we’ll walk you through the options.
We stock common KraftMaid shelf supports, drawer glide kits, hinge clips, and mounting plates in our West Palm Beach shop. These are the parts that fail most often on Vantage, Benton, Durham, and Hadley lines. If you need a less common part, we order it and usually have it within a few days. Call (728) 203-9809 and tell us what’s broken; we’ll tell you if we have the part on the shelf.
Refacing is worth it when the cabinet boxes are sound and the layout works for you. KraftMaid boxes are typically solid, especially the older face-frame construction. Refacing replaces doors, drawer fronts, and veneer, giving you a new look at roughly half the cost of a full replacement. In West Palm Beach, refacing typically runs $5,000 to $15,000 depending on kitchen size and material choice. If your boxes are compromised or you want to change the layout, a full remodel makes more sense. Call (728) 203-9809 for an honest assessment, not a sales pitch.
KraftMaid construction costs in West Palm Beach depend on the scope. Here are the standard ranges we work with:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing | $5,000 – $15,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Every quote includes a written price before work starts, so the number you approve is the number you pay. Call (728) 203-9809 for an exact quote on your KraftMaid project. Estimates are free.
Book Your KraftMaid Service in West Palm Beach, FL
If your KraftMaid cabinets need repair, adjustment, or replacement in Wellington, call Bradford Remodeling Co West Palm Beach at (728) 203-9809. We’ll schedule a walkthrough, give you a written price, and stand behind the work for a full year. No voicemail trees. A real person answers the phone.
Written by Curtis Lane, Owner at Bradford Remodeling Co West Palm Beach, serving West Palm Beach since 2004.
